Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Humidor question

Posts

Humidor question

#1

Humidor question

Brian Holcombe

Afternoon gents!

Building a desktop humidor and debating where to place the humidity unit. I normally put them in the top, but being that this unit is taller than my usual, I'm considering putting the unit in the bottom and making a tray to raise the cigars about 1/2"~ allowing an air gap between them and the humidity unit.

The reason for my contemplating this is that I am concerned that a tall unit will not provide good humidity to the lowest cigars in the box.

Any thoughts?

Re: Humidor question

#2

Re: Humid Air

Mark Mandell - Gone Round In New Jersey

is heavier than less humid (or dry) air, I believe [given equal temperature].

Might dry out your top-level smokes.

Re: Humidor question

#3

Re: Humid Air

Brian Holcombe

Thanks Mark! That answers my question, the humidity device goes into the top.

Re: Humidor question

#4

A Suggestion

Mark Mandell - Gone Round In New Jersey

ask your local cigar shop (NOT the guy at the 7-11 selling Chinese-wrapped lettuce) ;)

Re: Humidor question

#5

Re: A Suggestion

Brian Holcombe

Will do, there are a couple good shops around here (Princeton).

Re: Humidor question

#6

Clint Searl

Humid Air is actually less dense


Re: Humidor question

#7

Re: Humid Air is actually less dense

Brian Holcombe

Thank you Clint, then it looks like I should stick with my original plan.

Re: Humidor question

#9

When I was involved in the...

Brian Roberts

setup of a guitar factory the experts told us that we did not need to consider air movement in an enclosed area when concerned about humidity.

Humidity will reach equilibrium throughout an enclosed area...like a room or guitar case....very quickly....even with no air movement whatsoever.

Re: Humidor question

#10

Re: When I was involved in the...

Brian Holcombe

Thank you!