The rain has gone, cooler temps have returned, and a new fire started in the woodstove for heat. Getting plans together for the LOML Jr's baby cradle since this will be our first grandchild, I'm just a bit excited about venturing into my first cradle work. I'm looking forward to it.
Been working at lot at the day job and getting yard work done on the nice days. The LOML has had me busy working on a honey-do list. I still need to finish the daughter's blanket chest that we both started a long time ago. Time seems to slip past me before I even get started good.
That's it for me, so what did YOU do this past weekend?
I got my big mower out for the first time this year and mowed my usual 3 acres.
Sprayed the fruit trees in the budding phase. Treated weeds in the back paddock with gly-4. Spent two hours working on the bee hives. Moved hay, hauled feed, watered and fed animals, herded peacocks, collected eggs (the hens are picking up), transplanted strawberry plants, dug onions and leeks, prepped and tilled part of the garden, cleared brush, plugged a tire, dealt with a skunk in a trap, worked on a 4-wheeler, caught a horse who decided to jump over the fence then rebuilt one fence section to make it higher, taught a kindergarten class of 8 wonderful kids. Spent over an hour fixing one stinking water hose! (I HATE cheap hose clamps.)
In the shop I processed a bunch of figured cherry, maple, dogwood, and some olive into turning blanks, turned a few spindles and a hard maple square-ish platter, repaired a friend's computer power cord and a wireless remote for a dust collector.
But most of all, I just enjoyed the great weather! (Did cover the blooms on the blueberry bushes just a little while ago due to a threat of frost, though. Springtime in TN...)
I finally got the nerve up and commenced my quartersawn sycamore dining room table. I've actually had the wood for it on the shelf since around 2000 and have just not had the nerve to touch it for fear of destroying a bunch of very expensive flitch-matched stock. I've been thinking of a design (I don't do drawings) off-and-on over the whole time but since starting I've changed my mind at least four times after closely examining the material.
My Subaru has been evicted from the garage for now so that there is room to work. New realizations: you can actually cross-cut and rip big stock using a little Dewalt 18v saw with finish blade and get really smooth results, 10-foot X 16" 6/4 planks are clumsy to move and are damned heavy, seven 7-1/2' rip cuts 6/4 planks creates a ton of very fine sawdust with no hope of dust collection from a tiny saw.
I'll have to try to find someone with a big drum sander to surface the top since my skills at hand planing aren't up to the task but I'll try to get everything else done before that.
My weekend accomplishments were negative. I took the battery out of the mowing tractor and put it back into the tractor with the snow blower. Then moved that tractor from the barn to the garage. This morning there is 3" of snow on the lawns but since it was 35 degrees outside, it never stuck on the driveway or roads.
Made some good progress in a large double chest of drawers I'm working on for my kids. I think I've finally overcome my procrastinator tendancies and hope to finish this by May.
finished the last of 3 cutting boards for a silent auction. This one in olive wood from a tree my neighbor took down some 18 months ago. I milled and dried the wood.
I make several every year for this charity. They sell for $100-150!! so its worth doing. A quick and dirty project for fund raising.
I also got a call about a board bought at that auction a couple of years ago. Seems a guest had used her cutting board to cut on -!!- and left a few marks [horrors!!]. She was in a panic about what to do with a cutting board with a few marks on it.
Saturday was our annual CNC day at the Mohawk Valley Woodturners meeting. Our founder works at a stair parts manufacturer and we gather there to make a project each year. We come up with a plan, the programmer does his thing, and we go and crank out pieces. In the past we have done rolling pins, pepper mills and walking sticks (with spiral routed in). This year was a small table lamp. The video is just the body -I did not record the base part.
Saturday evening and most of Sunday was spent working on a burial box for a set of human remains that were dug up at a local historic site and are being re-interred. The remains have been identified as from the early 1800's and mostly of African descent-probably slaves. Several artists and woodworkers are creating containers for the remains and I am working with a ceramic artist and a fabric artist as a team.
I'm refinishing an old rifle stock for a friend here, and once I got the finish off there was such a nice piece of Claro walnut underneath that I got inspired to tidy up the rather quick and dirty factory checkering job. Its a bit tedious, but really not too hard when following an existing pattern.
Yes, the sides are horizontal 3/4" solid maple pieces. Each piece has 1/4" tongues on each end that slide into grooves in the 1 3/4 X 1 3/4 vertical uprights. Additionally, the top, bottom and one of the middle horizontals have a 1" tenon that will be glued to keep the verticals aligned and prevent them from bowing in the middle. The other horizontals float. There are loose splines between each horizontal to help keep everything flat. The cock and bead profile between each horizontal hides any gaps that might otherwise be visible. Slight gaps were left intentionally to allow for movement with humidity changes. Here's a photograph of similar construction from a piece I built several years ago.
The square frame members are joined with double mortises and tenons. If you're interested, I'll post more photos as I progress at my customary glacial pace.
I made cutting boards for Christmas gifts for friends and neighbors two years ago. I made an extra one and gave it to my wife. She won't use it for fear of marking it with the knife, so it has become a de facto kitchen decoration.
What else is new, eh? LOML returned from a week in Indy visiting our grandkids. I picked her up at EWR and we proceeded to New York City to celebrate our wedding anniversary on Sunday. Took in a Broadway musical, stayed in a nice hotel, and drove out to Ian Kirby's house in Connecticut on Sunday afternoon. He's still in great shape at 83 and still making amazing furniture and architecture. We had a nice visit and returned home yesterday. I'll upload some pics of his house and furniture one of these days. His style is very contemporary, and the craftsmanship is over the top.