Water and Shellac
Bill Tindall, E.Tn.
The question of water and shellac comes up from time to time. What follows is some information on this topic.
The "alcohol" solvent for shellac may be ethanol or a mix of ethanol and methanol. The way methanol is made leaves it water-free (anhydrous). Hence, it contributes no water to the mixed solvent or the dissolved shellac.
There are various routes to making ethanol. If at any step the ethanol is distilled from water, for example a fermentation, it will contain 5% water. It is a property of ethanol that it vaporizes from a water solution as a 95/5 mix of ethanol and water. In technical terms it forms an azeotrope with water. Other routes to ethanol make anhydrous ethanol.
Because ethanol evaporates as a water/ethanol azeotrope the 5% or less water in the formulated shellac will evaporate with the ethanol and not stay behind on the wood.
As a result of the possible sources of alcohol shellac solvent the result can be an alcohol solvent that contains more or less methanol and at most 5% water. For example the Jasco alcohol in my shop is a mix of 40% methanol and 60% ethanol (by analysis). One would expect it to have at most 60% times 5% water = 3% water.
Anhydrous alcohols will absorb some water from the air but under normal handling this source does not contribute greatly to the resulting water content. For example, my several year old half full can of Jasco alcohol contains 3.6% water by analysis. Presumably the "extra" 0.6% got there through exposure to the air.
A more significant source of water in shellac results from condensation. Ethanol evaporates rapidly and methanol even more so. Evaporative cooling of the coated wood will condense water more or less from humid air. At worse, spraying shellac under humid conditions can leave a layer of water on the wood as though it had been sprayed with water and not shellac! But even under less humid conditions more or less water is going to condense on the coated surface as the solvent evaporates.



