Interior Barn Door Hardware
tom
Anyone know of a source? Have a potential job coming up. This is the sliding door type hardware.
Knowledge You Can Build On — Est. 1998
Interior Barn Door Hardware
tom
Anyone know of a source? Have a potential job coming up. This is the sliding door type hardware.
Re: Interior Barn Door Hardware
Barry Irby
The Big Boxes used to carry the old galvanized style. This was the square track with the internal wheels. Not a snazzy looking as the single bar style. Don't know where to get that.
Re: Interior Barn Door Hardware
Charles R. Smith
Lee Valley sells aluminum barn-door hardware (part number 00B10.80).
Charles
Rockler
Re: Interior Barn Door Hardware
Clint Searl
Got mine at either Lowes or HD; don't remember which. Had the rail extended about a foot by local iron monger. It's very nice hardware. Door is about 44"wide.
Re: Interior Barn Door Hardware
Gary Smyth
Ebay has many listings under "Sliding Door Hardware". Any browser check under "horse stall sliding hardware". Artisan Hardware provides alternatives for sliding doors but pricey.. Check "Houzz" for examples. There use "barn doors" for photos and "find a pro" for sources. Worthwhile site. Pictures often provide a source for the shown item.
Remind your client that they will likely lose a large portion of the wall when the door is open which is most of the time. If they have the space --fine-- but gone are cabinets, shelves, mirrors, pictures, base board heat, etc. Sealing the door is awkward and reinforcing the wall may also be necessary to support the hardware and hefty door.
Door Hardware
Ken Krawford
CS Hardware has a pretty good selection. http://www.cshardware.com/rolling-ladders-doors/rolling-door.html
I've bought quite a bit of other hardware from them and have been very happy.
source- a place that builds pole barns
Re: Interior Barn Door Hardware
John Foster
I would contact any building supply that carries VicWest steel products. They have the complete line of square and round track. Not fancy, but it is the industry standard, you will still get parts for it decades from now. Also economical and durable.
No I don't work for them.
home made
Tom Dunlap
I e seen some nice versions on Instructibles using many styles of rollers and hangers
Tom
Re: Interior Barn Door Hardware
Al Stokka - Cambridge, Iowa
Tractor Supply Co.