Exterior Door Retro Question
tom
Had a thought about retro fitting a metal clad exterior door. The idea is to mill cedar T&G to 3/8"x ? and glue it to the metal door skin. Looking to create a plank look door. I would modify the stops.
Thoughts?
Knowledge You Can Build On — Est. 1998
Exterior Door Retro Question
tom
Had a thought about retro fitting a metal clad exterior door. The idea is to mill cedar T&G to 3/8"x ? and glue it to the metal door skin. Looking to create a plank look door. I would modify the stops.
Thoughts?
Re: Exterior Door Retro Question
Barry Irby
Might look stupid, but I would hold it back around the edges to let it pass the stops. Beef up the hinges and screws for the added weight. Uhh, interior or exterior side? or both? What about the hardware? Will it still work?
Re: Exterior Door Retro Question
Dick Coers
I'd guess it will depend on direct sunlight and moisture. The wood will move, the steel won't. If it was behind an all glass storm door, you get a green house affect. Personally, I wouldn't do it. I just don't think it would last long.
Re: Exterior Door Retro Question
Kneale Brownson
Why not just make an all-wood door?
Re: Exterior Door Retro Question
tom
The exposure is North so sunlight is not a factor. I have built exterior doors before. Just looking at some ideas.