Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

QOT Light

Posts

QOT Light

#1

QOT Light

Mark Mandell - Gone Round In New Jersey

as in "quazi" :D

The light on my bench grinder burned out and I'm unable to find a replacement.

"So" sez I, "How's about rewiring it for LEDs?"

"You don't know jack (or Jill) about the subject . ."

"Ah," sez me, "I'll ask the guys on Woodcentral."

So, WC Dudes and all, anybody rewired a bench grinder light with an LED or three instead of an bulb?

Re: QOT Light

#2

Re: QOT Light

Lee Schierer in McKean, PA

My bench grinder uses a regular incandescent bulb @ 120V. Why not just get a screw in LED bulb?

Lee

Re: QOT Light

#3

Re: QOT Light

Walt

Is it a special size or base? There are lots of small bright LED lamps but you might need a 12 volt power supply. A 12 volt 'wall wart' might be enough.

Re: QOT Light

#4

Re: QOT Light

William Duffield

Thinking outside the box, you could save a lot of time and effort if you just got one of these:

http://www.leevalley.com/US/Wood/page.aspx?p=71189&cat=1,43349&ap=1

No wiring required. No mounting problems. And, you could use it elsewhere when you weren't grinding, e.g., bandsaw, drill press, lathe, workbench, etc.

Re: QOT Light

#5

That may be the easiest option

Mark Mandell - Gone Round In New Jersey

Thanks

Re: QOT Light

#6

Re: QOT Light

Jerry Roberts

Ah, I really don't recommend one of those.I have one and the light just isnt that good in my opinion. Its ok in a pinch but not all the time. Other people that have them might have a different opinion though.

Re: QOT Light

#7

Re: QOT Light

William Duffield

You're probably right; it works in a pinch. Most places in my shop, I have plenty of overhead light, and this one is just enough more that I can see the necessary details. I really prefer another work light I built, with a GU10 LED Bulb, 50W Halogen Bulbs Equivalent on an articulated arm. It provides much better light, but it's not always convenient, because I have to unplug it, find a dog hole and an outlet where I need it, and plug it back in. The gooseneck on the L-V light is a lot easier to aim when it's magnetically attached to a bandsaw door or a drill press head, etc. Always trade-offs! I'm still searching for the perfect work light, and I've sure found a lot of imperfect ones. The other problem with this and all battery powered LED lights I've found is that they gradually lose lumens as the batteries discharge.