Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Source for Poly

Posts

Source for Poly

#1

John Pierce

Source for Poly

John Pierce

Can someone recommend sources for 1 quart size of General Finishes Enduro Poly?

Re: Source for Poly

#2

Re: Source for Poly

Daves Not Here

Rockler has it.

Re: Source for Poly

#3

Homestead *LINK*

Mark Mandell - Gone Round In New Jersey

Jeff Jewitt's site.

In quarts and different glosses


Call Jeff

Re: Source for Poly

#4

Re: Source for Poly

Richard McComas

Go to General Finishes website and do the dealer search. That's what I did and to my surprise there a couple dealer in Anchorage saving me the time and expense for shipping.

You can't win if you don't try.

Re: Source for Poly

#5

John Pierce

Re: Homestead

John Pierce

Mark, I think that you gave me spay painting instructions 4 years ago, along with Jeff Jewitt's location to buy Enduro. I finished a table top based on you help and it turned out very nice.

Recently, I have a winter project of building a cabinet to hold a printer and two drawers. I am building it out of Cherry and have a built it so there will be a left side, right side, and front panel with a top. My aim has been to get it finished so I can spray paint it in my Garage before the bug's become active this spring. With this construction method each panel can be painted on a horizontal platform that I constructed after my visit with you, and then re-assembled.

I have the Enduro left from 4 years ago, but decided to purchase new paint for this project in case the old paint would not turn out as nice as i would like.

The top I plan to make for an old top which has a Polyurethane finished from a previous project. I expect to either strip or sand the polyurethane off and refinished the top along with the new panels. I'm not sure which method to use to get the Poly off the old top.

Thanks for reminding me of Jeff Jewitt as a source for the Enduro.

John

Re: Source for Poly

#6

Re: Homestead

Mark Mandell - Gone Round In New Jersey

Hi John,

Glad to hear things worked out.

Can't speak to 4-year old Enduro, but you might ask Jeff on that.

If the old top you mentioned is cherry, I'd shy away from stripper in favor of abrasive removal. Stripper can discolor woods and, I think cherry is prone to it.

Just remember to work through the grits sanding in between to get rid of embedded abrasive granules.

m

Re: Source for Poly

#7

Re: Homestead

fredhargis

Jeff wrote an article for a magazine (can't remember which) about the shelf life of finishes, it had a lot of info but I remember him saying the shelf life of waterborne finishes is best considered to be about 2 years. I've had some (Target Coatings) that has kept longer, but if I was risking a project I don't think I would take a chance.