Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Help with Festo angle/miter bar

Posts

Help with Festo angle/miter bar

#1

Help with Festo angle/miter bar

Barry Irby

I posted my gloat below about acquiring some Festool tools at auction. In the mix is a Festo miter or angle device that has a 48" bar on it. I am guessing it has to do with the track saw, but I can't see any way to attach it.

Anybody have any experience with it?

Re: Help with Festo angle/miter bar

#2

Re: Help with Festo angle/miter bar *LINK*

Jesse Cloud

What you have is a fence that attaches to a Festool Multifunction Table (MFT). It can be used with a piece of track and hinges that attach to the table. The saw or a router can then run on the track and make a cut at a selected angle to the fence.

Can't think what you could do with it unless you have an MFT. Might put it on criagslist or something, but I suspect most people who have an MFT already have that fence, so it probably wouldn't bring a whole lot.

Here's a link to the festool page on the MFT. There's a slightly different fence out there for older model MFTs.


Festool MFT

Re: Help with Festo angle/miter bar

#4

Re: How could you tell without a picture Jesse?

Jesse Cloud

Thanks Dick. I didn't know about the product you posted. Hope that's what it is!

Re: Help with Festo angle/miter bar

#5

I knew about it because

Dick Coers

I've had one sitting on the shelf since the day I bought it. It's a hazard with Festool. if you buy the accessories and don't have an immediate use, it's a $100 bill sitting on the shelf. Okay Barry, who wins the guessing game? LOL

Re: Help with Festo angle/miter bar

#6

Re: I knew about it because

Barry Irby

Neither as far as I can tell.

This thing has a 48" bar that is about 1 1/2" by a 1/2" with a tee slot in one edge and one in the wide face. Some sort of sliding stop on the wide face. It says FESTO on the body of the protractor part.

Not sure it has anything to do with the track saw. Got the whole kit and kabootle at an auction and it may have been lumped in. Wish I knew how to post a picture. Have forgotten how to reduce the file size.

Re: Help with Festo angle/miter bar

#7

Re: Another guess

William Duffield

Festo is an old name, replaced in the US with Festool several years ago. They used to make another work table, the MFT 1080, or something like that. 1080 means the top is 1.08 meters, or about 42-1/2" long. The bar you have might be one of the pieces that wraps around the edge of the older, larger table top to hold clamps, attach tracks, etc. You might find it faster, and even spot some uses for it if you just use Goole Images search for MFT or MFT 1080.

Re: Help with Festo angle/miter bar

#8

Re: Help with Festo angle/miter bar

Jesse Cloud

Barry,

Is this what you have?

If so, its the fence for the older model MFT table.

Re: Help with Festo angle/miter bar

#9

Exactly......

Barry Irby

The bar I have is about 48" and I have a stop on it that slides and lock in place.

Wonder what I can do with it without the table? Does nay one have the table and need the angle guage?