Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Paint Longevity

Posts

Paint Longevity

#1

John Pierce

Paint Longevity

John Pierce

I have a cam of General Finishes Enduro Water Based Clear Poly. I bought in in 2012 and used in an a cabinet project. I havent touched it since. I currently have a new cabinet project ready for painting over Cherry Stain. Of I properly strain it can it still be used?

John

Re: Paint Longevity

#2

I'm no fan of tempting fate with old finish

Dick Coers

Maybe it will be okay, maybe not. I just don't like ending a lot of hard work with a guess if the finish will be okay. I vote for buying a new can.

Re: Paint Longevity

#3

John Pierce

Re: I'm no fan of tempting fate with old finish

John Pierce

Boy, your comment about all the work creating my cabinet really grabbed me. It true that that was a lot of work.

John

Re: Paint Longevity

#4

Re: I'm no fan of tempting fate with old finish

TomD

I have a can of Captain's varnish I still use that was bought around 1980. I have used 20 year old epoxy.

Oil finishes like captains seem to last well, and epoxy is ok over time, depending. Water based stuff is anyone's guess usually it rusts through the can and one has to get a new can before I toss it.

As with almost all questions on finish the answer is not to be found in social media, but by running a test sample. Slap some on, most of that stuff dries fast. When it is thoroughly dry an adhesion test with masking tape.

Re: Paint Longevity

#5

The problem with old waterbornes is.....

Howard Acheson

.... that when you apply it, the water will evaporate but the other chemicals will not coalesce into a hard completely cured film. It looks and feels "dry" but its not.

After spending time and effort on a project why take a chance on old finish? Finish is not the place to be frugal.

Re: Paint Longevity

#6

Re: The problem with old waterbornes is.....

TomD

Good tip. As I say, I am not sure about water finish, but as I also say, the chance is not running tests, moreso than what you have. There could be a problem with the new can or some contamination problems, a test is a test. Also I have been using colour preserver that is maybe 30 years old on rods. And it is the same looking smeling and acting stuff, as a lot of these water finishes that happened along years later, and it keeps working. I have Acrylic bonding agents that are pretty old. I am not certain there is a problem just because it is water. But there are all kinds of water based products out there, so something new every time.