Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Carving challenge for someone...

Posts

Carving challenge for someone...

#1

Ellis Walentine

Carving challenge for someone...

Ellis Walentine

I suspect a few of you could presume to undertake this project, but I'll leave it to you to respond to this touching query that came in over the transom today...

Good Afternoon,

I would like to see if our unit would be able to purchase a custom

going away present for our Captain.

She is a Military Veterinarian and I wanted to get something like a

German shepherd with a stethoscope around its neck, to symbolize the

Military Working Dogs we see and veterinary medicine with the stethoscope.

Would this be possible?

V/R

SGT Clarke, Jade

Animal Care Sergeant 68T30

NAS Corpus Christi VTF

Office: 361-961-4956

Cell: 210-557-0268

Email: jade.c.clarke2.mil@mail.mil <mailto:jade.c.clarke2.mil@mail.mil>

"I think we are drawn to dogs because they are the uninhibited creatures we

might be if we weren't certain we knew better." George Bird Evans


Re: Carving challenge for someone...

#2

If only the wood were dry...

John in NM

We had a bunch of ponderosas come down in a storm over Christmas - some of the log wood is big enough to do a full size dog carving if only it weren't wet!

Re: Carving challenge for someone...

#3

Re: If only the wood were dry...

Keith Newton

Carving green is the way to go, if you haven't tried it. That s how I would want to do it anyway.

Re: Carving challenge for someone...

#4

Won't split?

John in NM

We were just joking about getting some of the Smokey Bear carvers over from Ruidoso to make something of all the stumps!

I'm still conditioned to think that green always splits. I guess carvings and bowls might not?

Re: Carving challenge for someone...

#5

Ellis Walentine

Not if you carve it right

Ellis Walentine

The principle is to be aware of the grain direction when using edge tools, especially ones like shaves and chisels that don't have limiters (e.g., a plane mouth) on them. Cutting downhill on the grain is a rule with green and dry wood both. Green wood is more yielding, which is a pro and a con, but success depends on your touch with whatever wood you're carving.

Ellis

Re: Carving challenge for someone...

#6

Here are a few things that I would do.

Keith Newton

First don't use the whole circle, or if you do, drill out the largest hole that you can manage up from the bottom getting rid of the pith. It might work to even do some others around that one. After it is dry you can plug those holes on the surface.

Still better, is to work without the pith. It is not too unusual for the pith to be off-center, allowing there to be large clear blank on one side. Still even with that, try to stay out from the pith and juvenile wood.

While the carving progresses, I will use a spray bottle of water to keep any minor checking from starting if there are details that go slower in one area, leaving some others exposed longer.

Whenever I quit for a break, lunch, or overnight, covering the whole thing with a cloth, or box will slow the evaporation process. And when it is finished, I keep a close eye on it, knowing moisture loss will be fastest on endgrain, intermittently covering and exposing that, will allow the whole mass to come down at a nice slow pace, without building stress on the surface while the middle is still more saturated.

I have not ever worked green Ponederosa, and don't know if it is prone to blue staining. I would guess if it is, it would already be in there after this long, unless it has been cold enough to prevent it this long.

Re: Carving challenge for someone...

#7

Re: Carving challenge for someone...

John C Lucas

I would go a totally different route. I would turn a hollow vessel and then use prography to draw the dog on the vessel. Did that many hears ago when i took a class with Frank Sudol. The whole class did and it wa s pretty amazing how well we all did. Its just a matter of learni g to burn hair and tben paying attention to detail as far as how the hair flows around the body

Re: Carving challenge for someone...

#8

That is what I was planning to do, if,,,,,,

Keith Newton

The Sargent ever answers my email.

I was thinking of Ranger sitting upright on his haunches, holding the stethoscope in his mouth. This would offer a pretty good shape for hollowing from the bottom.

I'm putting the finishing touches on a carved turned, lidded vessel using a Cecropia Moth chrysalis as the inspiration. I'll post some pics when it is finished.

I sent an email, asking if they had a budget, and deadline, but haven't heard anything.