Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Thanks Dick Coers and others for faucet tip

Posts

Thanks Dick Coers and others for faucet tip

#1

Thanks Dick Coers and others for faucet tip

Tim Greif - West of Chicago

I used the "CLR as penetrating oil" trick on the old Delta shower control dome ring as suggested. What a difference. I soaked it with a paintbrush a few times a day for 2 days. When I went to remove the ring, it spun off like it was brand new. I'm definitely going to remember that trick. Now that I have it apart, I just need to figure why the flow is so restricted. Thanks again.

Re: Thanks Dick Coers and others for faucet tip

#2

Re: Thanks Dick Coers and others for faucet tip

Yonak

Once again exhibiting my ignorance. What is CLR ?

Re: Thanks Dick Coers and others for faucet tip

#4

Re: CLR

Mark Mandell - Gone Round In New Jersey

It's a branded product composed of lactic acid, water, and a surfactant. Often used to help remove mineral scale from shower/bath fixtures, tile and glass doors. Does well, but will tend to attack tile grout.

Re: Thanks Dick Coers and others for faucet tip

#5

Thanks Tim

Dick Coers

Yeah, surprised the hell out of me the first time I tried that technique. I really like CLR for all the fixtures in the bathroom. It really takes out that hard water line in the toilet bowl too.

Re: Thanks Dick Coers and others for faucet tip

#6

Re: Thanks Dick Coers and others for faucet tip

Chuck Bjorgen

I also use CLR to clean my coffee maker. Instructions for this are on the bottle but after the initial cleaning I cycle plain water through the unit three times before making coffee. Been doing this for many years.