Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Scaffolding Idea needed

Posts

Scaffolding Idea needed

#1

Scaffolding Idea needed

tom

I have cedar siding on our home and a section needs to be replaced. The challenge I am facing is how to scaffold the area. It is above a section of roof which has a 12/12 pitch. So anyone here ever face a challenge like this? How did you solve it.

Thanks!

Re: Scaffolding Idea needed

#2

Re: Scaffolding Idea needed

John Foster

Rent a telelift.

Re: Scaffolding Idea needed

#3

Re: Scaffolding Idea needed

Jim Hoeller

I would call a contractor.

Re: Scaffolding Idea needed

#4

Re: Scaffolding Idea needed

Barry Irby

Lots of variables. What kind of roofing do you have? How old is it? How is your fear of heights?

Google Roof Jacks.

If you can use them, they might work for you if you don't end up killing the roofing.

The telelift is a good idea also. Depending on your site. If it is reasonably level around your house it could make the job easy. If your site is too sloping, not so much.

Re: Scaffolding Idea needed

#5

Re: Scaffolding Idea needed

John in NM

From what I've seen, cleats are typically fastened to the roof to anchor the scaffold, but how this is done without a bunch of holes in the roof is something I don't know. Perhaps hang something over the peak? Doesn't seem too solid though.

I betcha Jason knows :D Probably he's seen it a bunch of times, being a painter.

Re: Scaffolding Idea needed

#6

Funny... never heard them called that before

John in NM

We always called them either a boom lift or more generally a man lift.

Re: Scaffolding Idea needed

#7

Re: Scaffolding Idea needed

tom

I had considered a lift and maybe that would be the easiest way to go. Thanks!

Re: Scaffolding Idea needed

#9

Been on one....

John in NM

Could have been called a tiltawhirl! :D

Re: Scaffolding Idea needed

#10

Re: Been on one....

Bruce, a MN Galoot

We had two at a plant I worked at. The larger had a total reach of 20' and it had remote driving controls in the bucket. Not a good idea. My head operator, a 22-yo kid, once took me up in it and we drove around the freezer (a 300 ft sq. building) with the boom half extended. I didn't like that at all :O

Re: Scaffolding Idea needed

#11

Jason Roehl in Lafayette, IN

Re: Scaffolding Idea needed

Jason Roehl in Lafayette, IN

There are a lot of different ways to approach something like this. Most siding guys I've seen would use a combination of ladders, ladder jacks (attaches to 2 rungs of the ladder to support one end of a walkboard), a walkboard, roof jacks, etc, not scaffolding nor a lift. Not that those can't be used, that's just not what the siding companies use typically.

Roof jacks are nailed to the roof (preferably a truss or rafter) after a shingle has been carefully pried back. It has slots so that it can be slid upward and off the nails, then the nails can be pounded flush and the shingle laid back over them.

Jason

Re: Scaffolding Idea needed

#12

Helps to be the driver

John in NM

Driving one for a while you get used to how they move and then riding isn't so alarming. I didn't work with them long enough to ever get used to a 50' extension on a breezy day though :D

Re: Scaffolding Idea needed

#13

Alan Young

"Telelift"???? *LINK*

Alan Young

Reading through this thread, I saw two references to a "Telelift" which caught my attention. When I googled the term I found a German based company producing a variety of conveyor systems-


Then I found this- which looks like a form of a fork lift- perhaps helpful in getting materials high-but not exactly "scafolding"


So I am wondering of the term Telelift- Is a combo term from these two products-

"PanelLift"


and "Tele-Tower"???


The Tele-Tower (See link below) will probably get you access -But it's usually use for indoor work-You might need special exterior castors--


Tele-Tower

Re: Scaffolding Idea needed

#14

Re: Funny... never heard them called that before :

William Duffield

We often call boom lifts in general by the name of the manufacturer of the orange ones, JLG.

Re: Scaffolding Idea needed

#15

Re: Scaffolding Idea needed

Steve jenkins

You don't say where you are but if in the Dallas,Tx area I gave a bunch of roof jacks that I bout when I built an A frame house. You'd be welcome to borrow a few if you're close.

Re: Scaffolding Idea needed

#16

Re: Scaffolding Idea needed

John Foster

Google Haulotte 3632T . We have one available on our rental program. the nice thing about it is that it will self level on very uneven ground. And the sensitivity of the controls is adjustable, a new operator can set a very light response, no jerkiness.

Re: Scaffolding Idea needed

#17

Re: Scaffolding Idea needed

TomD

Without being negative, the big problem with this kind of deal is that if you have to ask, you probably shouldn't attempt it, you are engineering on the fly. So all is well if the lift is affordable. Around here there is no way, it would be cheaper to hire the guy to do the siding, so long as he is insured.

The neighbour up the street just dealt with this exact problem. He did it by building a floor onto the roof, and simply went up from there. He had a roofline perp to the sidewall (which I imagine you would have said if you had also), and he joisted across the roofline, carried the loads outbound to the ground. As though he wanted to build a flat roof over the roof. He was doing a bunch of stuff there, and while he is a very efficient worker, that scaffold was up there for a long time. Exactly how to do something similar in your situation would depend, on... Everything. Pics at a minimum.

Whatever you do, don't trust your life to something nailed into a 12/12 pitch that doesn't hit a rafter. How do they nail without hurting the shingles? They fold the shingles back, and then nail. It requires a fair amount of skill to do it and hit what you are after, and not wreck the shingle, a hot day helps.

You can nail right through the shingle and a glob of goop will almost certainly reseal it, but you have extra material between the strap and the nail, you can't see the underlying structure in most cases.

Re: Scaffolding Idea needed

#18

Re: Scaffolding Idea needed

Jay Lombardo

Used to use them all the time. You can reasonably rent units that you can pull like a trailer now. Very stable. You don't need the units that drive around, cost a lot more to rent and deliver etc. Units used to rent for about a couple hundred a day. Used to get them cheap if they weren't real busy. Retired now so things might have changed a bit.

Re: Scaffolding Idea needed

#19

Re: Scaffolding Idea needed

TomD

The problem I see with 200 a day, worth it if it means you can get the job done in 1/5th the time. But as a homeowner, there is no saw off against insurance and wages, it is just money flushed down a hole, and time lost renting returning, and reading the manual. And amateurs may never have done the job before, an extra day or two can slip into a job as you run to get stuff you hadn't anticipated, or scratch your head. By the time I was at 4-600, I could have justified a pump jack set-up, given it's general utility.

I'm lucky because I have a background in rock climbing. Hasn't translated into mobility at my age, but there is never an issue of a fatal fall, I can always engineer my safety.