Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Oliver 2018 Lathe

Posts

Oliver 2018 Lathe

#1

Oliver 2018 Lathe

Rick Rouse

I've had a midi sized lathe for about 20 years. Like it and don't plan to get rid of it. But, I want to move up to a heavier lathe with a between the centers length around 48" to 50". Its easy to see reviews on most lathes like Powermatic, Robust, Delta, Grizzly, OneWay, etc. Can't find any reviews on Oliver 2018s. I took a look at one at the distributor's warehouse in Kent, WA. Its a large and very heavy piece of machinery! I have talked to a retailer who said its a good piece of machinery but sometimes has glitches in the F/R switch. I'd really like comments from someone who owns one. Thanks

Re: Oliver 2018 Lathe

#2

Post this on the Turning Forum


Re: Oliver 2018 Lathe

#3

Re: Oliver 2018 Lathe

Alan Hollar

I don't own one but the manual and pictures I see seem to indicate a Reeves drive for speed control which is less than ideal for an 18" swing lathe with a $3K plus price tag.

Re: Oliver 2018 Lathe

#4

Ive always had an issue with their marketing

Dick Coers

They talk of the rich history of Oliver, and have an old picture of Oliver plant number 1 on their home page from Grand Rapids, Mi. In fact they only bought the name, are located on the West Coast, and only import machinery. Plant number 1 burnt to the ground in the last year or so. To me, it borders on deceptive advertising. No idea about the lathe.

Re: Oliver 2018 Lathe

#5

Re: Ive always had an issue with their marketing

John in NM

I've wondered recently what happened to the original Oliver outfit. I talked to a guy at their plant around 1998 or so about how to adjust one of their old lathes. The guy I talked to said the company was making bread slicers and sterile packaging equipment for the medical supply industry. They still had workers who knew about the woodworking equipment though.

When the Chinese made Oliver stuff started showing up a few years ago, I figured the original Oliver company was gone and the name sold as an asset, but I see that the bread slicer company is still around with the Oliver name but a different logo. I wonder if that was spun off?

Re: Oliver 2018 Lathe

#7

Re: Oliver 2018 Lathe

john Lucas

I am a very active woodturner and try to keep up on all the equipment out there. I have read virtually nothing about Oliver lathes. That alone would make me want to stay away. Anything that is any good, someone has purchased and written a review or at least posted that they like or don't like it. I have not seen anything about the newer Oliver. I had an old Oliver for a very short time. It was a quality piece of machinery but newer lathes have specs that work better for what we turn today. For example most older lathes had too high of a minimum speed for what we turn today.

Re: Oliver 2018 Lathe

#8

Re: Oliver 2018 Lathe

Rick Rouse

Thanks John for your comments. I called a couple of Oliver's dealers and the reason, they say, that you don't see any reviews about Oliver tools is that almost all their customers are industrial users who rarely comment on any of the tools they buy. One dealer shared a couple of recent customers and they are large specialty furniture manufacturers on the west coast. I'm hoping to find a craftsman, professional or serious hobbyist who own one. At almost 800 pounds net weight most guys/gals see just moving the machine into their shop as problematic. I noticed that most internet reviews are posted by individual professionals, craftsman, hobbyists and once in a great while small shops. Rarely do I read a review from a large industrial plant on machinery. Thanks again for the comments. Normally, I feel the same way

Re: Oliver 2018 Lathe

#9

Re: Oliver 2018 Lathe

Rick Rouse

Thanks Allan for your comment. I called a dealer for the machine who is very familiar with the motor and drive mechanism. The machine has a frequency inverter with speed range from 50 to 3200 rpm. It doesn't change speeds with a reeve pulley drive like my Jet midi lathe does. The handle seen in the video controls the inverter which controls the speed range. I kinda though the same as you originally but after I took a close look at the machine at the distributor's warehouse and talked to a dealer who sells a fair number of this lathe to industrial users I found out that its not a reeve drive pulley system. GOOD comment though. Thank you for taking the time to share your thoughts.

Re: Oliver 2018 Lathe

#10

Re: Oliver 2018 Lathe

Rick Rouse

Thanks John for your comments. Very much appreciated. I'm trying to decide between a Powermatic 3620 and the Oliver 2018. Some would say I'm comparing an a high end Mercedes Benz to an economy car. Maybe not. Both lathes are made in Taiwan (China). Just about all the iron casting in all machinery today comes from Taiwan. There are some almost purely American made steel lathes, like Robust, but they advertise that 85% of the components in their machines are American made and I don't have $7,000 for that level of quality (the Mercedes Benz) as much as I am a proud American who feels committed to our economy. I'm still working my schedule to take a look (kick the tires so to speak) at a PM 3620 at the closest dealer to me ---- 75 miles away. My posting is seeking a craftsman, professional turner, serious hobbyist or small shop who has an Oliver 2018 lathe. Mostly, the sales of this machine are to industrial users who rarely post on any kind of social media about their machinery. Again, thanks for your comments. They are very much valued.

Re: Oliver 2018 Lathe

#11

Re: Oliver 2018 Lathe

John C Lucas

I have a Powermatic and love it. The company has a good sevice history as well. The Oliver is a total unknown. I know there are a lot of members of our club woth Powermatic or Jet lathes made by the same company. Everyone is satisfied you can hardly buy American in power tools anymore unless you buy the very top dollar i tried years ago. Bought from Delta and Powermatic both had factories in my state of Tennesse . All the tools i bought came drop shipped from Taiwan.

Re: Oliver 2018 Lathe

#12

Why didn't the dealer give you references?

Dick Coers

You would think they would be more than ready to help you buy one.

Re: Oliver 2018 Lathe

#13

Re: Why didn't the dealer give you references?

Rick Rouse

I didn't ask. The dealer is almost 100 miles from my home and I didn't see myself visiting a manufacturing plant M-F and taking vacation time off from my job.

Re: Oliver 2018 Lathe

#14

i meant any reference

Dick Coers

It looks like a very similar, if not exact, is sold by Bailiegh. It does look like they use a different control instead of that handle that looks like a reeves drive handle. Less than $3000 with free shipping on EBay.

Re: Oliver 2018 Lathe

#15

Re: i meant any reference

Rick Rouse

Thanks Dick. You are right. Its looks almost the same. For reasons I can't figure the Bailliegh is almost 200 pounds lighter than the Oliver. The machines look the same. I was able to personally take a look at the Oliver lathe. The closest Bailliegh showroom is almost 1,000 miles away in CA. I'm still thinking about which machine to buy and need to do a test run with a PM lathe at a dealer about 70 miles north of me on day soon. Then I'll decide. Your comments have been very helpful and appreciated.

Re: Oliver 2018 Lathe

#16

Re: i meant any reference

Rick Rouse

Hi Dick. Just wanted to say THANKS again for your comments. I did contact Bailiegh and unfortunately the closest opportunity I have to actually see and touch one of their lathes is about 1,000 miles south in Ontario, CA. No dealers in the Pacific NW. I guess I'll take a look at the Powermatic lathes that are available just a short 60 miles north of me.