Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Flattening Shaptons

Posts

Flattening Shaptons

#1

Kent B

Flattening Shaptons

Kent B

My move from a real shop to a corner of a room in a condo meant I had to re-think a number of things. One was sharpening. No mess [or, limited] was a driver that moved me to a set of Shaptons. I'd had a couple, used occasionally, so I added a couple.

I have a DMT Coarse for flattening the Shaptons - picked it up with a Shapton 120 for about $75 for the pair.

Have used the DMT on the 120 and on an 8000. Seemed OK, but I don't have the experience to really know.

Is the DMT Coarse a reasonable choice? Not at all interested in the buck-eighty for the DMT lapping plate, but if there is another modest $$ option that is better than what I have, I'd be interested in your thoughts.

Re: Flattening Shaptons

#2

Ellis Walentine

I flatten them with each other

Ellis Walentine

I've got 2000, 5000, 8000 and 10000-grit Shaptons and I just wet them and rub them on each other to flatten them. I'm sure the diamond plates are somewhat faster, but my stones don't get too much out of flat to begin with, so it's not a hardship for me.

FWIW,

Ellis