Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

painting printed particle board

Posts

painting printed particle board

#1

painting printed particle board

Larry

Has anyone been able to paint printed particle board ?

Thanks

Re: painting printed particle board

#2

Re: painting printed particle board

Dick Coers

Are you asking about melamine, or something else? Never heard of printed particle board.

Re: painting printed particle board

#3

Re: painting printed particle board

Barry Irby

I had some 1/4 Masonite with a printed surface. Got it free. If it gets wet, the printed face falls off. I used it for junk projects, where it got used briefly and then thrown away. Hope what you have is better than that.

Re: painting printed particle board

#4

Re: painting printed particle board

Larry

It's melamine.

Re: painting printed particle board

#5

Jason Roehl in Lafayette, IN

Two things.

Jason Roehl in Lafayette, IN

1. Scuff sand (~120-180 grit) for a mechanical bond

2. Use a bonding primer (for as much of a chemical bond as possible)

Jason