two issues, the real answer.
TomD
Issue number one is whether given your skepticism you paid too much. There are cheaper machines that do a good job, so if you don't think you need one, but might need one, you could get your refund and find one for 50 bucks, maybe you can do a deal with Bill.
The other thing is whether you are ever in a rush to do anything. Franz Klausz is a pretty good hand with the tools. He can dovetail and fit a drawer in 20 minutes, yet he did a tape on BJs. He showed how to use them to build cases, and presumably sold that kind of work as a pro. But a lot of us are looking for ways to use up time, if I BJ a joint I don't feel like I did the right thing. I could have done a proper MT
Here are a couple of additional points:
- For some the BJ is a step up. All their projects use drywall screws say, but the BJ is solid wood joinery.
- Creativity is part of it, you can do a lot with a BJ if you don't have other tools. I put together a bank of simple cabinets for my parents when I was down for a visit. They have pretty good tools, including a Dewalt BJ. What they don't have is any of the extras that are necessary to make proper M&T cabinets in any kind of efficient manner, if at all. Nor is there any decent wood readily available, even the paint grain pine would need truing. What I eventually found was mahogany door jam sets for the frames, bead board, and paint grade ply. It all went together with biscuits, I even used the biscuits to make a french cleat system. Part of an efficient build is keeping the work flowing, and in this tiny shop the BJs really helped that happen. At one point my mom asked me to make a wall hung pocket to hold her phone books. In an M&T set-up, the settings on saws and such would have been lost by this point. But with BJs, I could just slap the frame and panels together, and then BJ then to the tapered sides, and then I used BJs to hang the whole cabinet from the drywall. I just put them in then cut away some of the Bs until they looked like fangs. I used a thin chisel to cut slots in the drywall, and hung the cabinet directly to the drywall. No exposed hardware, triips to the store to buy hardware, and it comes right off if you need to clean the wall, or move large pieces of furniture past it. But at home I have specialty tools for everything, so I don't need to use BJs, and my vanity makes me believe I am a better craftsman for not using them when there is something more time consuming that will do a better job a few centuries from now.