Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

finding thicker wood

Posts

finding thicker wood

#1

finding thicker wood

Simon St.Laurent - Dryden, NY

I'm enjoying the latest from Christopher Schwarz, the Anarchist's Design Book, and it has me thinking about my lack of local wood purchasing options. Around here (beyond Lowe's and Home Depot), I can find 4/4 wood in a 30-minute drive and 8/4 wood in a 60-minute drive. Beyond that, it's at least two hours to northern PA.

Schwarz's staked furniture wants thicker tops:

"I wouldn’t want to make a piece of staked furniture with a platform that

is less than 1-1/2" thick. Once you get to 4" thick, you can make almost

anything with staked construction. (33)"

For the sawbench, not a giant project, he writes:

"Elm would be the historical choice, but good luck finding that. Poplar or pine are readily available and suitable.

You want the top to be thick – about 2-1/2" to 3" is sufficient. A thick top gives you a lot of joinery surface for the conical mortise and tenon – and that’s how you can get away without having any stretchers between the legs. The top should be about 7" to 9" wide x 17" long. But don't worry if your dimensions are a little bigger or smaller."

I'm not looking for elm, though I'd be happy to stumble on some. (I have a bit of 4/4.) But where might I find 10/4 or 12/4 poplar? Even pine in those thicknesses is unusual.

This almost seems like a case where mail order could work better than the usual boards - thicker stuff, but not gigantic. (At least at first.)

Re: finding thicker wood

#2

Re: finding thicker wood

TomD

I haven't seen his book, and I do recall it took him some years to find a piece of wood for his Roubo bench with the solid top.

My way of getting this kind of wood is I saw it myself. If you saw thick wood yourself, it is the cheap option as far as the sawing is concerned, so while most people may not go that route if it appeals, it makes more sense to go thick than thin, in my experience.

On smaller pieces, up to maybe a chair seat, the thick wood is called firewood. Again, making it thick is not all that difficult, if you have a standard chainsaw, you can kerf a log and split out pieces and rapidly get some stuff. You can also resaw stuff, freehand with a chainsaw. I do have a lot of wood available to me on my woodlot, but it is not the wood I really want. I have had little trouble finding the species I want, mainly cherry. I would like walnut, but we don't have it around here in quantity. The only serious problem is storage.

Re: finding thicker wood

#3

Re: finding thicker wood

John K Jordan

Have you tried a local sawmill? I have one behind my barn and often cut thick cherry, poplar, cedar, walnut, elm, persimmon. One friend stopped in driving from out west and loaded her station wagon with slabs until it was almost dragging! All the local wood in her area was pine, etc.

Before I got my woodmizer I bought slabs up to 3" thick at a couple of local places. Some had been air drying for years. Quite cheap. Cheaper if green. Some offer kiln dried wood.

Jefferies Wood Works, a local wood supplier here in East TN keeps almost everything in stock from ebony to tulip poplar. They have boards, slabs, and turning wood. They are NOT cheap though! May be someone similar in your area.

The Woodmizer company will connect people with sawmills.

http://woodmizer.com/us/Services/Find-a-Local-Sawyer

The Woodfinder might have sources in your area.

http://www.woodfinder.com/

JKJ

Re: finding thicker wood

#4

Ellis Walentine

Try Woodfinder.com *LINK*

Ellis Walentine

Simon, I typed your zip code into Woodfinder and the closest supplier I could find to you was in Syracuse, 44 miles away, but they do list 10/4 poplar. Heavy stock is always harder to find than 4/4 through 8/4 stuff. In some cases, it is purely a matter of supply and demand; in others it has to do with the feasibility of drying lumber that thick. Kiln drying requires much longer kiln schedules, which means more energy. Some woods, such as the oaks, are very prone to honeycomb in thicknesses over 8/4, so the degrade can be very costly to operators.

Elm is a scarce timber in any thickness. You might do well to look around for local band mill operators who are cutting oddball species and thicknesses and be prepared to settle for something other than you're looking for.

Ellis

[Disclosure: Woodfinder® and WoodCentral are owned by me.]


Woodfinder

Re: finding thicker wood

#6

Elm

John K Jordan

>Elm is a scarce timber in any thickness.

I didn't realize elm was scarce, but I never tried to buy any. I have a few elm logs in my pile - I guess I should get to sawing!

Maybe 10 years ago a neighbor cut down a huge elm tree and had already cut it into big chunks by the time I found out. This tree had some beautiful complex dark figure all the way down the center so I saved a number of turning blanks. I just turned one last week, need to get a photo.

JKJ

Re: finding thicker wood

#7

Re: finding thicker wood

John McGaw

A 30-second search turned up at least three different sawmills near you, Guthcess Lumber Company, Robert Collins Sawmill, and Wagner Hardwoods. Have you checked with them? Sometimes mills will cut you what you want even if they don't have it on hand at the moment. There are probably more sawmills and suppliers closer than you think; I set out to find those close to me when I moved to my present location and, after a few years, I had turned up dozens of small-to-large suppliers.

Re: finding thicker wood

#8

Re: finding thicker wood

Simon St.Laurent - Dryden, NY

Yes, I know of all these folks, and suspect I've used wood from all of them, but they're mills that run like factories. Excellent factories, but not eager to get calls about odd-sized chunks of wood.

Thanks!

Simon

Re: finding thicker wood

#9

Re: Try Woodfinder.com

Simon St.Laurent - Dryden, NY

Yes - I'd used Woodfinder Friday night. Apparently I missed the 10/4 poplar in Syracuse. I'll go look again!

Thanks,

Simon

Re: finding thicker wood

#10

Re: finding thicker wood

Simon St.Laurent - Dryden, NY

Yes - if I have a reason to go to Philadelphia, I'll have to stop by. The $300 minimum on orders is kind of a limiting factor, but their stuff is beautiful.

Thanks,

Simon

Re: finding thicker wood

#11

and thank you

Simon St.Laurent - Dryden, NY

for pointing me back to the Syracuse Forest Products folks. The Woodfinder entry is promising, but their site changed drastically to an all-hardware product list and put me off. I'll try calling!

Thanks,

Simon

Re: finding thicker wood

#12

Rather Than Retailers

Mark Mandell - Gone Round In New Jersey

Look up "saw mills" in your phone book and/or do a geo-area search on Google. Small mill guys often have slab stock that you won't find in retail yards.