Spent the weekend doing things around the house as well as taking time to be with the family for New Years. Cranked up the woodstove for some heat in the house and ready to get back to work today. Should prove to be a busy week at the day job. The LOML and I are now working out to get fit at a local gym. The first time that we've ever done this and we are really enjoying it. Our hope is to lose some weight, feel better about ourselves, and get more fit that the standard couch potato.
That's it for me, so what did YOU do this past New Year's weekend?
Good morning! Looks like the Holidays are done for another year. It's kinda nice to get back to the regular routine.
In September I had the opportunity to watch a Tlingit totem carver in Sitka Alaska carve with a crooked knife for a couple of hours. I left thinking, "I've got to have one of those." LOML ordered one from Del Stubbs at Pinewoid Forge for my Christmas gift - thanks Kaye. It is a beautiful tool, perfectly finished and sharp as a razor. I finally got a chance to try it out over the weekend. There was a 2 X 2 soft maple cutoff from a project I'm working on laying on my bench. I sketched out a spoon, pasted the sketch on the cutoff, roughed it out on the bandsaw and went to work with my new knife. A couple of hours whittlin' and I had a nice spoon - almost instant gratification, or as close to instant as you can get in woodworking. The Stubbs hook knife is a wonderful tool. It cut the soft maple like butter and me three times. I managed to avoid bleeding on my spoon, thank goodness. Here's the result of my first spoon effort:
When i was in the Navy back in the early '50s we had a Chief Engineer who sat around doing nothng but whittling. I saw him whittle a wooden chain from a 2x2 about 3ft long. Links were about 1/2-3/4" thick.
My Lovely Bride of 46 years had a New Year's resolution to take up horseback riding. We have fields and trails and, handy, horses!
This is her first time ever on a "real" horse during a lesson with our young trainer. Now she's a maniac - riding around the fields, shopping for boots and gear. I get to tack up, clean hooves and such. Next step is to try some trails with two horses.
Also cleaned out and reorganized the old barn, refined the plans for the new barn, cleared mud with the tractor, spread gravel, and turned a lidded bowl from figured Elm.
Uncle George survived a number of runs to Mermansk as a merchant mariner during WW II. When they were not dodging U Boats, he had time to carve chains and balls in cages. After he came home, he gave me his carving knife, a 3 in single blade folder whose blade was worn down to little more than a toothpick.
I upgraded my shop (1/2 of a suburban double garage!) to the new LED lighting fixtures from Costco. There was an Energy Rebate so they were $25 before tax. Each fixture throws 3700 Lumens at 4000K cool white light.
And here I was congratulating myself on finally buying and installing the fourth and final electronic ballast in the two-tube 96" fixtures in my shop this weekend. Guess I'm a couple of generations behind the curve with my 600W worth of antique lighting.
I have "old fashioned" fluorescent lamps that put out nearly as much light from a single tube and the LED fixture. There are T5 HO lamps that put out nearly twice that amount of light from a single tube.
LED shop lighting has two potential advantages. They make less heat and they cost somewhat less per lumen of light. I find neither a compelling advantage. I am after lumens per fixture. To that end I am lighting with T5HO lamps. Not cheap but my shop looks like a sunny day.
I bought several LED fixtures recently for my barn. One was expensive and the other was cheap, both quite bright. The box of the cheap one claimed 50,000 hour life but who tested that and will they even be around 50,000 hours from now? And where did I put that receipt?
I've been reading up on lighting: work light brightness recommendations, lumen claims, how age affects the pupil size and amount of the light needed, and perceived brightness in the human eye described by the scotopic/photopic (S/P) ratios, etc.
I came across some troubling information. One was the claimed efficiency of LED lighting compared to fluorescent which mostly disappears when compared with electronic ballasts at equivalent frequencies.
Another was degradation from the high heat of bright LEDs (notice how hot a 1000 lumen LED flashlight gets in just a few seconds). I see the fixture I bought this week for my tack room uses the large, fairly thick aluminum reflector housing as a heat sink.
Another more troubling thing was in a report from a few years ago about a lawsuit against Lights of America regarding some of their LED lights. One point in the FTC suit was "the company contended that one of its bulbs would last 30,000 hours. But tests determined that after only 1,000 hours the bulb lost 80% of its light output."
Yikes. I hope this isn't true for high quality lights. But some, like me, buy the cheap lights at Sams and Cosco. It would be sad if people installing a shop full of lights today find their lights at 20% brightness at some time in the not-too-distant future.
I can say they are improving... it will be interesting to see what the long term lifespan is though.
We got some incandescent replacements through a deal at work about 3? 4? years ago and while the spec life span was something like 30,000 hours the actual was more like 10 (yes literally 10 hours, not 10k hours). The light was really good for those 10 hours though.
In that case lack of appropriate heat dissipation was clearly the problem (and there was some inappropriate design choices on the assembly that made the problem worse). Newer ones seem to be getting to where they the heat dissipation design is generally better and some of the LED types also emit less heat.
Since then I've replaced some of the lights in the living room with newer LEDs and at ~30-50 hours they're still pretty nice as I was able to get "daylight" bulbs (actually 5000 kelvin which isn't quite daylight as its still a bit white/blue and would have preferred 5200 k bulbs but couldn't find any at a reasonable price). LOML is much happier with them as she does a lot of fine lace knitting and was having some trouble with the yellower CFL bulbs not putting out enough light anymore (heh, its not just the bulb heh but the contrast was also bad with them).
I've also put in one of the single bar el-cheapo LED strips in as an accessory light over the lathe:
and I gotta say for the price its been working pretty well. I've only had it for ~6 months so the actual lifespan is still TBD.
Most of the rest of my shop lights are two bulb T5's and the one bar LED puts out about as much apparent usable light (the T5's are 5200k temperature). I'm thinking once the residual T12's finally bite the dust the replacements will probably be LED unless something changes my mind between now and then.
When I started replacing the T12's as I ran out of bulbs ~3 years ago the T8's were the clear winner in price/performance between them and LED. Now I'm somewhat less convinced.
There is a lot of variation in the quality of LEDs. It really pays to do research in the specific model you're looking at.
The next big thing just might be incandescents. I recently read where a group at MIT (I think it was MIT) got an incandescent with efficiency that approached LED/flourescents.