Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Demilune -top

Posts

Demilune -top

#1

Demilune -top

Bill Tindall, E.Tn.



One of my greatest joys of building is wood selection. I have been keeping a rough looking but wide piece of walnut for some time. It had a clear section, with a nicely symmetrical grain pattern just wide enough for the demilune top. The rest was large knots and fiddle back grain, unsuitable for this top. But the board was too narrow by 1 1/2 inches. With a lot of diddling I found a section of the cut-off waste that matched the grain where it needed the extra 1 1/2". The result is shown.

It is a good bet that the best match for a section of a board is a piece from somewhere else on that board, as illustrated in the picture.