Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

21 Dec 2015

Greetings Everyone,

My hope is that this finds each of you warm, dry, progress on Christmas gifts a plenty, and healthy.

Spent some time this weekend helping #2 son with brakes on his car and good thing I have a heated shop for us to work in. Nothing like working on a vehicle inside a shop with lights, heat, in the dry, and tools really close by.

The guitar project is nearing an end and Chuck and I area already planning on the next guitar build. Once I get it all setup, I'll post a pic.

Had out of state family visit this weekend so it's been busy with them and really happy to spend time with family. Been fighting a sinus infection for the past week and I'm way past ready to be over this. I truly need to be in the shop and working instead of laying up in the house trying to get well over a sinus infection and cold. First one I've had in 4 years.

Went with the visiting family to see Star Wars Episode 7 and enjoyed the movie as well. I remember when the first Star Wars movie came out and my buddies and I waited in line for over 3 hours to catch the midnight showing at a theater in Denver, CO way back in 1977.

Well, that's it for me....so what did YOU do this final weekend before Christmas?

Best of weeks to you all....and Merry Christmas to each of you from The Peacock Family.!!!!!

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

David Yoho

I worked last week and the weekend on most of the parts for the 16 drawers that will go in the 9-foot dresser I'm building. The drawer boxes will be constructed from poplar, and bottoms made from solid 1/4" Spanish cedar, to which I will attach fronts made from cherry.

The cherry fronts will have an inlaid veneer (I still need to make) that will cover most of the surface with only about 3/4 of an inch of the cherry visible across the top and bottom of each. The veneer will be figured Makore (African cherry) that will be 3/16 thick.

The 1/4" Spanish cedar bottoms I re-sawed at my bandsaw from 4/4 stock sure left the shop with a pleasant spicy smell. Currently I'm gluing up the individual pieces for the bottom panels, which will get cut to size and inserted into the drawer boxes.

Next up will be the false drawer fronts and then the cherry top. Then I'll install the drawer slides and turned bun feet. I'll be using full-extension ball bearing soft close slides I got from Lee Valley.

Re: WC Weekend Accomplishments....

#3

Hardwood floor

John in NM

We tore out the carpet in a small room - kind of a dressing room/closet - and put in some utility oak flooring. Man, even after doing just 45 square feet I can see the advantage of a proper flooring nailer! :D

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Rich Pearson in Mill Creek, WA

I've never built a 9 foot ( ! ) anything. I hope you have a sturdy platform to stand on.

Photos, as the work progresses, would be very welcome.

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

Johanna Johanson

That's an awesome project! Please do post some pictures.

Re: WC Weekend Accomplishments....

#6

Re: WC Weekend Accomplishments....

Jesse Cloud

Hey Johanna. Did you ever get your bandsaw working? I followed your thread, but lacking any insight whatsoever into electrical stuff, I thought it better to keep quiet.

If you need to use a bandsaw, give me a ring or email. I, too, have a Steel City so nothing special.

Cheers,

Jess

Re: WC Weekend Accomplishments....

#7

Rich and Johanna...

David Yoho

I will try to post some shots soon. I've been a bit delinquent in taking progress pics this go around due to how busy things have been. However, I will put something together and post.

My small shop has been so tight with all the lumber piled up it's been tricky to move around. Now that most of it is cut up for parts it's not any better because those parts are turning into bigger parts. I'll probably assemble the drawer boxes, then make the false cherry fronts, slice the Makore veneer, and start on the cherry top. I'm making the dresser in two cases that I'll join once they're delivered on site so I can easily carry them up the stairs and into the room they're going in. Right now they're stacked on top of each other on dollies so I can roll them out of the way as I work.

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Johanna Johanson

Not yet, Jesse. I think I have found the correct one on Amazon, but am waiting to confirm that it is exactly the right one. Which Steel City bandsaw do you have? Mine the 18" 50250 - 220V. If yours is the same, I'll let you know when I have the correct replacement in case yours ever gives out.

I also need to turn some inserts - Steel City wants an outrageous amount for replacement inserts.

Re: WC Weekend Accomplishments....

#9

Re: WC Weekend Accomplishments....

Kevin French

Finished my granddaughter's guitar stand

 photo P1220827.jpg

 photo P1220830.jpg

and almost finished a light for one of the local breweries

 photo P1220835.jpg

When finished it will hang by two chains, horizontally.

Re: WC Weekend Accomplishments....

#10

Here's a few shots for now

David Yoho

These were snapped quickly this evening and aren't as clear as they might be. The first shot is of both dresser cases (one on top of the other). They are made from birch ply faced with maple. In the end all you'll see are the two end panels. The birch and maple play well together.


The next shot is of all the drawer box parts cut to size and joinery cut. Most of the drawer bottoms are glued up but need to be cleaned up, sanded and cut to size.


This final shot shows the last two Spanish cedar bottoms glued and in the clamps. With the edges properly jointed very little clamp pressure is needed. I used liquid hide glue on one edge of each joint, rubbing them as I put them in the clamps.

I'll post some progress shots as I go, since there is some interest.


Re: WC Weekend Accomplishments....

#11

Thank you!

Rich Pearson in Mill Creek, WA

I always enjoy the "in progress" shots and of course the finished project will be gallery quality.

Re: WC Weekend Accomplishments....

#12

Re: WC Weekend Accomplishments.... *LINK*

Jesse Cloud

Yup, I have the same saw. The switch died while it was still under warranty.

Rockler sells plastic inserts that fit nicely. Choose the Delta model.

You will need to cut out a little slot to fit the tab on the saw, but you would have to do that with a turned insert anyhow.


Rockler inserts