Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Grain filler after bleaching

Posts

Grain filler after bleaching

#1

Grain filler after bleaching

Brian in SLO

I just completed refinishing a table for one of my customers who wanted her oak dining table "whitewashed'. As it turns out she liked the look of a bleached color with a water based poly satin finish. The job went well and delivered and she was happy but I still wasn't completely satisfied with the final surface of the table.

With the deep grain inherent with oak I usually like to use a grain filler to smooth the surface. I can add stain to match and it leaves a nice smooth, color matched surface. However, with a bleached surface the grain filler being a 'neutral' color tends to leave that neutral color in the grain which doesn't match the bone white color of oak after bleaching. I didn't feel I could sand the water poly to make a slurry fill for fear of losing the bleached surface to the underlying oak color once again.

Anyone familiar with a grain filler that dries clear or maybe a solution of some sort that would allow me to keep the bleached color without yellowing but still obtain a smooth surface?

I appreciate any helpful ideas.

Re: Grain filler after bleaching

#2

Re: Grain filler after bleaching

Dick Coers

There is a neutral colored filler. You could consider a white filler, or adding white to the neutral. I've never added any grain filler after the clear coat.

Re: Grain filler after bleaching

#3

Re: Grain filler after top coat *LINK*

Mark Mandell - Gone Round In New Jersey

While g-f will go on nicely after the surface is sealed (I think it works better that way), he'll then have to redo his top coating or the filler will tend to fall out during subsequent use and cleaning. I use Crystal-Lac when doing a filled-pore finish. It dries mostly clear but then goes transparent when the clear-coat soaks in. Since it's waterbased, you need to seal raw wood first or the grain will raise, and you're back to heavy sanding to get a flat surface.

I used it on Memsahib's walnut slab table in the Gallery


Here

Re: Grain filler after bleaching

#4

Re: Grain filler after bleaching

Sgian Dubh

If it's "bone white" you're after, you might consider plaster of Paris, which has long been used as a base material for grain filling, the appropriate colour being determined by the pigments added. There's a description of using this material at the following link, a page from my website, although you'd almost certainly omit the powder paint used for colouring the plaster of Paris up. Slainte.

http://www.richardjonesfurniture.com/Articles/green-grain-fill/green-grain-fill-table.html

Re: Grain filler after bleaching

#5

Re: Grain filler after bleaching

Brian in SLO

I like the plaster of paris idea which I would imagine is easy to sand smooth. This would fill the grain nicely and still not impart any yellowing, then follow with the water based poly would do the trick.

Thanks!

Re: Grain filler after bleaching

#6

Clint Searl

Re: Grain filler after bleaching

Clint Searl

A paste of talc-in-poly(waterborne) may do the trick.

Re: Grain filler after bleaching

#7

Liquitex Modeling paste *LINK*

clay foster

This is my go-to filler for most things. It dries white, can be sanded, and tinted any color with acrylic paint. A retarder will help. Work small areas at a time.

Golden brand has a product called molding paste. It's not the same. It doesn't sand well. It doesn't work for my purposes.


modeling paste

Re: Grain filler after bleaching

#8

Liquitex Modeling paste - which product?

John K Jordan

>Liquitex Modeling Paste

>This is my go-to filler for most things. It dries white,

>can be sanded, and tinted any color with acrylic paint.

>A retarder will help. Work small areas at a time.

Clay,

Thanks for this, it looks intriguing for several uses. I see they offer a variety of products when I searched for "modeling paste".

I found these, all of which have "Gel Medium" on the label:

- Modeling Paste (marble dust and polymer, dries to hardness of stone)

- Flexible Modeling Paste (100% polymer)

- Light Modeling Paste (airy, flexible)

Then there are these with the word "Gel" in the name:

- Matte Gel

- Matte Super Heavy Gel

- Ultra Matte Gel

- Gloss Gel

- Gloss Heavy Gel

- Super Heavy Gel, gloss finish

- Slow-Dri Blending Gel

Which of these do you use for grain filling? They are too expensive to buy a bunch to experiment with!

JKJ

Re: Grain filler after bleaching

#9

Re: Grain filler after bleaching

Barry Irby

The mention of Plaster of Paris made me think of my go to filler on things like closet shelves.....drywall compound. Not the same thing at all. Plaster "sets" and rather quickly and can be quite hard, I have very little experience with it. Drywall compound dries and can be on the soft side. I have skim coated many knotty pine shelves with it and sanded them smooth before painting. Works great and has held up for years. Makes an amazing difference in the appearance of the shelf.

I would want to experiment on a scrap before using it as a grain filler on an important project. Different brands are differing shade of white. Some are nearly white and some are a little almond. Sands easily. Just a thought.

Re: Grain filler after bleaching

#10

Re: Grain filler after bleaching *LINK*

Hank Knight

Behlen's makes a water-based grain filler in a Neutral (white) color. I use it a lot because it takes stain well. I've also used it on oak without stain to get a "pickled" effect. Here's a photo of filled but unfinished red oak on an easel I built for my daughter.

[URL=http://s50.photobucket.com/user/hankknight/media/DSC_2013Small.jpg.html][/URL]

Here is more red oak filled with unstained Behlen's filler and finished with polyurethane.

[URL=http://s50.photobucket.com/user/hankknight/media/IMG_4233.jpg.html][/URL]

It dries very fast and sands well and doesn't yelliw over time. I would guess it's considerably tougher than plaster of paris or drywall compound. I have no clue how well it would adhere to an already finished surface.


Behlen's neutral water based grain filler

Re: Grain filler after bleaching

#11

Re: Liquitex Modeling paste - which product?

clay foster

The modeling paste with stone dust. A little goes a long way. Wipe on just enough to fill the grain and wipe off any excess with a damp paper towel. The retarder gives more time to remove excess.

Another filler that is inexpensive but works well is unsanded tile grout. White grout can be tinted with acrylic paint or any dry pigment.


Re: Grain filler after bleaching

#12

Careful

Mark Mandell - Gone Round In New Jersey

The plaster, being sloppy wet, will raise the grain on your wood. When you sand (gently with the grain) you may cut through the bleached layer. You may have to rebleach [sic] to get your preferred color back.