I have been here, and... (long)
Grant in Iowa
When I got out of the Air Force and settled here in Cedar Rapids, I bought a property and also an old 1977 Wheel Horse tractor with all of the attachments. It served me very well, even making me some money for tilling work. We moved with it to our new house on an acre, and I even used the machine to grade portions of the lawn. By now, I had overhauled the engine, but began to notice the sundstrand rear end was beginning to give me trouble. I began to look for a replacement at the cub and John Deere dealerships at garden tractors with attachments available. It wasn't going to be cheap to buy new or nearly new and then get all of the desired attachments we had become used to. I had my eye on a JD X595, but with attachments it came to around $12K!
About this time my wife and I were getting started on some retaining walls and planters and such in the yard. She was helping me set a block wall and tore up her shoulder lifting one of the blocks. We realized that tractor pulling a yard cart and moving materials by had was the hard way.
During her recovery, we resolved to upgrade the tractor to one that could lift things. Cited reasons included my love of gathering logs to mill, our 3000 square feet of concrete drive with a propensity for snow to drift in, and our recognition that we weren't getting any younger. The cost of the shoulder repair helped make the decision for us.
I looked around and found a low hours Kubota BX-2200 tractor with a mower deck and a loader attachment that was easy to remove and reinstall at will. Far and away the most compelling feature of the tractor is that it had a non-proprietary 3 point hitch. This meant a myriad of attachments could be had at farm supply stores, as well as second hand. No paying a premium for a proprietary attachment like on a garden tractor from a name brand.
Today, we look at the cost of the tractor ($8500 used) as one of the best purchases we've made. I have been able to pick up extremely well made farm store attachments as I have needed easily and reasonably. We have:
-Box blade for grading gravel or dirt
-Quick attach loader system that allows me to change from loader to forks, and the forks also fit on the 3 pt. hitch when we need more lifting power.
-4' snowblower (don't like the snow in the front yard? Blow it to the back yard!)
-4' rotary tiller that has paid for itself twice over
-Log arch, allows the tractor to move logs up to 32" in diameter out of the woods with this little tractor. My lumber racks runneth over!
-Built a yard sprayer for lawn care that goes on the 3 point hitch.
-Built a utility attachment for the 3 point hitch for hooking chains, receiver hitches, a clevis, etc. for pulling both in the woods and around the homestead.
Owning such a machine, while a luxury, has allowed us to do things easily that would otherwise would have been a great deal of labor. I think of it as my little buddy, and it goes with me to the woods whenever there is tree work to be done.
Not saying you are in that position exactly, as you only need a drain plug. But someone here will be at the same crossroads eventually, and the grass is fine on the compact utility tractor side of the fence.
Regards,
Grant in Iowa