Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Need Parts Dimensions

Posts

Need Parts Dimensions

#1

Need Parts Dimensions

Mike Jurnigan

Last night the Richmond Antique Tool Society had our annual Christmas Gathering and tool auction. I picked up a Penncraft model 4183 Radial Arm Saw for the outrageous price of $20.00. This saw was made by Rockwell and is the same saw as the Rockwell Plus 105. The saw was missing 2 items an electrical cover plate that I can easily manufacture and the table tops. I was wondering if anyone has either saw and if they do could they provide me with the measurements for the three top pieces and the hole locations for the four attachment screws in the main table top.

Thanks in advance,

Mike Jurnigan, now in Zuni, VA

Re: Need Parts Dimensions

#2

Re: Need Parts Dimensions *LINK*

Hank Knight

Mike,

I have a Rockwell Super 900 RAS. The table configuration and mechanism looks very similar to the Plus 105. I have replaced the table boards on my saw numerous times. Granted, I used the old table boards as a template, but I have varied the dimensions over the years. Except for the location of the holes, the table board dimensions are not critical. You can make them just about any size you want. You should be able to locate the holes without too much trouble. Here'e a link to the users manual on Vintage Machinery dot Org that should help. They are nice saws. You should enjoy yours.


Pockwll Plus 105 User's Manual