Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Why?, She asked......

Posts

Why?, She asked......

#1

Why?, She asked......

Barry Irby

My grand daughter comes to visit about once a month. She was here for Thanksgiving. She's coming back for Christmas. My shop is in the basement. My son has told her that's Granddaddy's Dangerous Shop. We keep it locked while she is here. She's very artsy for a five yer old. I give her interesting scraps and she colors them and builds stuff. At thanksgiving she asked me to sand something for her and I did. I said, "Maybe next time you come WE can make something in my Dangerous Shop." She asked "Why"?

Good question. Why? Why do we do that?

Re: Why?, She asked......

#2

Because it's fun

Ralph Lipeles

Tell her that it's fun to make things and it makes you feel good to turn plain pieces of wood into pretty, useful things.

I introduces 2 of my grandchildren, 10 and 7 at the time, to woodworking a few years ago. We made spinning tops. Wood lathe, drill press and scroll saw were all used. They enjoyed working with the tools and playing with what they had made.

Re: Why?, She asked......

#3

Re: Because it's fun

Brian Holcombe

None of us really know.

Re: Why?, She asked......

#4

Re: Because it's fun

Barry L Elder

Acting as a devil's advocate, If I had a 5 year old artsy granddaughter, I certainly wouldn't want her in my shop. Too many opportunities for danger to show its' ugly head! :b

Re: Why?, She asked......

#5

Re: Because it's fun

Barry Irby

It's OK, I have a 4 year old spare. :)

Re: Why?, She asked......

#6

Re: Because it's fun

Larry

I think it's good for the kids, You need to teach them to respect the tools!

Re: Why?, She asked......

#7

Re: Because it's fun

Ron Pemberton

I have kid sized ear muffs and safety classes in my shop when our grandkids, now 11 & 12 years old visit. Hardly never to young to start teaching the proper use of tools and safety and respect of each.

A woodworker with complete 8 fingers and 2 thumbs.

Re: Why?, She asked......

#8

Because you said...

Lee Schierer in McKean, PA

It allows me to make nice things for people.

Lee

Re: Why?, She asked......

#9

Re: Because you said...

Barry Irby

I was planning to make little stools for the bath room and kitchen for her. Her Dad bought cheap plastic ones. I was bummed. May make the wooden ones anyway.

Re: Why?, She asked......

#10

Re: Because you said...

Ron Pemberton

Go ahead and make them Barry. I'm sure they will be appreciated.

Re: Why?, She asked......

#11

Re: Why?, She asked......

Bill Turpin in WNC mountains

Started my 8 yr old grandson on woodworking for Christmas. Each year he gained skills and had less fear of motorized tools. At 13 he attended the AAW symposium in Louisville, he was lucky, he won one of the $800 lathe kits. He is now almost 23 and about ready to start his own family. I will do the great grands the same.

Re: Why?, She asked......

#12

Why not?

John K Jordan

Chris Ramsey told me he introduced his son to the lathe at 4 years old.

I have a 5-year-old creative and artsy grandson and he LOVES the shop. I insure safety. He loves to drill holes with a set of gimlets. We do a lot of little projects including some bandsawn and carved wooden fish with a little pole with a wire hook. Last week "he" made his first thing on the lathe and colored it with bright markers - he was SO excited and showed everyone. Good clean fun!

Once he saw a stack of 1/2" plywood squares where I had tested the tablesaw and asked if he could draw on some. This is a self portrait, green marker on radiata pine:


He said his hands had sparks and his feet had fire.

After that, he had another idea which resulted in me taking a box full of squares and rectangles to his preschool teacher. Kids hardly EVER get to color on wood! (Hint: even high school art classes are sometimes desperate for materials other than paper and aluminum foil.)

JKJ

Re: Why?, She asked......

#13

Re: Why?, She asked......

TomD

It depends which "why", to be clintonian about it.

- Why go to the dangerous place:

Because it is only dangerous when you aren't there, or she doesn't do what you tell her to/knows is right.

- Why a wood shop:

Because, trees eat light creating the best and most environmentally safe art and craft material in the world. The foundation of civilization (Jesus was a carpenter for good reason). Every time you make a wooden toy you capture carbon, and make something useful. What material on earth is a viable option for making a musical instrument, a chair, a plane, a boat, a bow, a sculpture. And with the waste you can heat your shop for less money and co2 than with natural gas. And some of the nuts cure heart disease.

(I am sure your 4 year old would understand that. I do occasionally get stopped by people who wonder if the kid I am crossing the parking lot with actually understands all that stuff that is coming out of my mouth. Well obviously 50% of it is nonsense anyway, but yeah, never talk down to kids, unless you are a Nobel Laureate in science or something, and even then it might be a good idea to just flow with it. I will never be able to put that to the test).

- Why you:

Presumably you have that covered.

At the same time I resist the idea of transferring my bad habits to my kids. Woodworking is fine and all that, but there are any number of reasons "why the clay grew tall". They should find their own. Visiting my shop is a bit like visiting a counting room in Vegas, sure it might be cool, but some base human drives produced it, and I have lost friends when their wives discovered what my influence could lead to. In job interviews the applicant who builds boats as a hobby is to be discarded, and that line of thinking might be a good one for a young lady facing life's choices to be exposed to.

Re: Why?, She asked......

#14

Re: Because it's fun

Yonak

This is something to consider. Too many try to get the woodworking project done as fast as possible or let it sit idle until time is found to work on it, forgetting the fun is in the woodworking. The finished product is an ancillary benefit.

Re: Why?, She asked......

#15

Ellis Walentine

Wooden stools

Ellis Walentine

Funny you should mention them. I am almost finished with these two for my two youngest grandsons, ages 2+ and 3+. I chose simple finger joinery because it's strong and less time intensive than typical fabricated design with rails, through tenons, angled legs, etc.

If anyone wants to share their favorite step stool designs with us, I for one would be interested.

Ho ho ho,

Ellis


Re: Why?, She asked......

#16

Thanks Ellis, I might steal the design....

Barry Irby

How did you cut the finger joints? I have done them, but have forgotten exactly how I did it. Dim memories are slowly reappearing.

Your stool looks great. Appears to be stable. I bought one years ago at a craft show and it was a neck breaker. Too much over hang on the top. It would tip and throw you off in a second. I might even flair the ends a bit.

Re: Why?, She asked......

#17

Sequestering Carbon.....

Barry Irby

You made me remember when my kids were little. My friend showed up to spend the night. He's the smartest guy in the room, any room, has multiple masters degrees and several PHD's. Can talk for hours on almost any subject. It was getting late and we were angling for the kids to go to bed. In desperation one of them asked Bill why fire was yellow. (Being sure this would get a long talk out of him, delaying bedtime) He said, "You know how the trees have leafs and they grow out in the sunshine? That's just the sunlight they stored up in the wood coming back out." And off to bed they went.

Re: Why?, She asked......

#18

Ellis Walentine

Stool design

Ellis Walentine

Steal away, Barry. You don't need to flare the ends, though, as there is no overhang on the end, so the danger of spilling them endwise is slim. The legs are 9" wide at the bottom, but the top is only 8" wide, and the legs end with an outward stance, so tipping them in this direction is also unlikely.

The finger joints are just a simple dado jig on the tablesaw. I had to borrow some time on Paul Anthony's tablesaw to do them, since all my dado sets and other blades and cutters bit the dust when the shop burned down, and I never replaced them.

Ellis

Re: Why?, She asked......

#19

Re: Wooden stools - Ha!

John K Jordan

>If anyone wants to share their favorite step stool designs with us, I for one would be interested.

Ellis, I suspect you didn't have this level of quality in mind! I built this maybe 50 years ago, combination bench, step stool, and portable workbench. High end design, for sure!


24"x11"x16.5" high. Traditional primitive western Pennsylvanian hillbilly design.

The elegant design is artistically influenced by the width of a 1x12 pine board from the lumber yard. I'll bet you are quite impressed by the professionally distressed finish.

I built a bunch of these when my shop consisted of a sabre saw and hammer and screwdriver used on the sidewalk behind the house. I did have some sandpaper too.

I gave them all away except for this one. Everyone wanted one - someone told me to set up and sell them on the side of the road. Opportunity lost, I could have been rich and retired in luxury.

This is an incredibly sturdy and durable bench and stool with a shelf and a hand hole for carrying on top. It is great for projects around the house since you can put your hammer and screwdriver on the shelf and carry it to the job. It makes a great little portable workbench. I used to have another one with classy saw marks in the top.

This one has been a footware-changing station on our front porch since we moved to the farm years ago.

Hey, if you get several responses you might split them off into a separate thread with an appropriate title.

JKJ

Re: Why?, She asked......

#20

Re: Sequestering Carbon.....

TomD

Truly he was the smartest guy in any room.

I had a similar strategy. We were at this camp ground in Quebec, and wanted to get on the road I knew the road out of the place went past the pool and playground and we would be delayed for hours, or the kids would be angry we hadn't stopped. In NB where we were headed, there are covered bridges. Kids try to hold their breaths as the car inches over the bridges, and being covered the bridges are dark inside. So just before we rounded the corner to the playground I suggested the kids should hold their breaths, and close their eyes, as practice for the bridges in NB. We sailed by the playground without a word of protest.

However I always felt a little guilty about it, and have lost quite a bit of time at the same spot on subsequent trips.

Re: Why?, She asked......

#21

Re: Sequestering Carbon.....

John K Jordan

When we were kids in the 50's my dad would cross a certain bridge in Pittsburgh on the way to grandma's a couple of times a year. This bridge was surfaced with wooden planks which were VERY noisy when the cars crossed, so loud you could barely hear anyone talk in the car.

Dad started telling a joke loudly as he approached the bridge. All of us kids in the back seat leaned forward and jostled for position to hear the joke. (no seatbelts in cars then, you could lean forward over the seat back.) Unfortunately, the sound of the planks were so loud we couldn't hear very well, in fact he seemed to get harder to understand as we crossed until we hit the other side, then he would break out in laughter. This seemed to happen a lot. After a few years we realized it happened every trip.

It took a while but eventually we figured out the joke was on us.

JKJ

Re: Why?, She asked......

#22

Clint Searl

For first grandson

Clint Searl

Hogged out the lettering with a router, and cleaned the edges with chisels.


Re: Why?, She asked......

#23

Ellis Walentine

Re: For first grandson

Ellis Walentine

Nice job, Clint. My father used to make stools for our kids with decoupaged images and lettering. The sky's the limit when you're decorating a surface.

Ellis

Re: Why?, She asked......

#24

Ever show those to a client?

Grant in Iowa

If so, they would therefore be called "stool samples". :D

Regards,

Grant in Iowa