Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

demilune crotch stained

Posts

demilune crotch stained

#1

demilune crotch stained

Bill Tindall, E.Tn.


Before assembling the skirt to legs I stained the crotch veneer on the table skirt. The stain is 15 wt.% burnt umber japan color, 15% linseed oil and the remainder General Finishes "conditioner" (unnpigmented stain) which is what I was told GF uses to prepare their oil stains. I like the result of this recipe. It provides lasting color which isn't too dark.

Crotches can go too dark when they are stained and obliterate the figure.

Before stain I sealed with a wash coat of 5 wt.% shellac in alcohol to retard the uptake of the pigment.

Re: demilune crotch stained

#2

Re: demilune crotch stained - Question

Bob Entwisle in NJ

Looking good Bill, and thank you for sharing this build.

I know that you are not a fan of the traditional 'Lb cut' description of shellac, and I just wanted to clarify in my mind:

"Before stain I sealed with a wash coat of 5 wt.% shellac in alcohol to retard the uptake of the pigment."

Do I understand that correctly to mean 5% by weight shellac flakes and 95% by weight Alcohol?

Thanks

bob in NJ

Re: demilune crotch stained

#3

Ellis Walentine

Good recipe

Ellis Walentine

Do you sand the wash coat before you stain, so the shellac stays mainly in the pores?

Ellis

Re: demilune crotch stained

#5

Re: Good recipe

Bill Tindall, E.Tn.

In general yes but when "washing" a crotch it is like adding liquid to a sponge. In seconds its gone into the wood and the surface looks dry. So in fact for this case I didn't scuff sand because there was nothing to sand.

The problem of course is that the same thing happens to stain if the grain is motsomewhat sealed. A crotch can go nearly black. How much to seal comes from experimentation.