Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

PC 335 trouble

Posts

PC 335 trouble

#1

Kneale Brownson

PC 335 trouble

Kneale Brownson

Any BTDT regarding the PC 335 appearing to lose its drive. Motor spins, pad only spins if not engaged with the wood.

Re: PC 335 trouble

#2

Re: PC 335 trouble

Barry Irby

The PC 335 ROS uses an O ring as a drive belt. I bet yours is broken or missing. Easy fix. Might want to replace the bearings while you are at it.

Re: PC 335 trouble

#3

Kneale Brownson

Re: PC 335 trouble

Kneale Brownson

Thanks, Barry. Bearings probably are a good idea, given this tool's age and use history.

Re: PC 335 trouble

#4

Re: PC 335 trouble

Barry Irby

I have several of those sanders. I have rebuilt both of them several times. When I buy parts I double up and buy a set of spares. I usually have a set of bearings and the O ring on hand. You can buy the bearings at a bearing shop and get better ones cheaper. Its been a while but as I recall the lower bearings fail faster than the upper one. Completely worth while to do.