Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Wine Barrel top Clamp needed

Posts

Wine Barrel top Clamp needed

#1

Wine Barrel top Clamp needed

Kevin French

I got a call from a guy who needed some help make Adirondack style chairs out of Wine Barrels. He's got a lot of great ideas but has a problem of staying on track to get things done.

Our latest problems are the barrel tops, and bottoms. We take them apart and glue them back together to make Lazy Susans and Cutting Boards. We had problems with gaps in the tops when gluing. These are old top that have sat around the shop and had time to dry out, so with a new shipment in last friday my suggestion was to glue them up before they dry out and see if that works. Which of course lead to a new problem of the glue not drying as quickly. I suggested Gorilla Glue but he's tried that and doesn't like all the foaming glue that squeezes out and needs to be cleaned with solvent.

He's also looking for a better clamping idea we have these adjustable ones that work great of the centers but don't add a lot of pressure to the ends. He's tried ratchet straps but they are a bit of a pain because the edges come to a point.

 photo P1220746.jpg

 photo P1220744.jpg

Re: Wine Barrel top Clamp needed

#2

Re: Wine Barrel top Clamp needed

ben d.

Have not done it on a circle this large but take some flat wood even if you have to glue some together cut a circle in it ( need not to reach all the way around the barrel top ) that will be the same size as the barrel top fix a piece of 2x4 to the straight side ( which will be longer than the dia. of the barrel top ) and you will be able to clamp all the way across as needed and the ends will pull together, of course you will need 2.

ben d.

Re: Wine Barrel top Clamp needed

#3

their are 2 type's of gorilla glue

del schisler

the one that foam's is the syurp looking , the white gorilla doesn't foam

Re: Wine Barrel top Clamp needed

#4

Re: Wine Barrel top Clamp needed

Ralph Lipeles

How about making a base of double thickness 3/4" plywood or particle board glued together. Attach a 4 small pieces of 2x3 located so that you can used wedges between the top and the 2x3's. Maybe more then 4 pieces so that you will have additional locations for wedges as needed for each unique top.

Re: Wine Barrel top Clamp needed

#5

Re: Wine Barrel top Clamp needed

John in NM

First, I would not glue them before they dry out, or at least not without checking the %MC first. If it's much over 15-20%, the joints will fail or the staves will split.

For clamping, make a heavy board with some heavy blocks bolted to it around the perimeter of the top. You can use wedges between the top and the blocks to close the joints - Assuming the joints are more or less sound in the first place. If they have gaps at the ends you probably won't be able to close them at all or if you can the glue will probably fail.

For adhesive, I would just use wood glue for these.

Re: Wine Barrel top Clamp needed

#6

Re: Wine Barrel top Clamp needed

TomD

Cold Cure is a Canadian epoxy now made by Systems 3 in the US, that cures even under water, and can bond wet wood. Lee Valley has sold it for ever. Las I looked S3 was in seattle and they have many distributors.

For your clamping issues you need to make a jig that supports the edges and allow you to use your bar clamp. And inflatable hose approach is another option. I use them on bow blanks, you get fire hose and buy or make inserts that turn the whole mess into something you can use a compressor on. Bingham projects sells the manufactured parts if you want to go there. However, a hose will put pressure tangent to the curvature, which at the ends will be pretty much in line with the joints. A jig with bar clamps will keep the load perpendicular to the joints.

Re: Wine Barrel top Clamp needed

#7

Thanks for all the help


Re: Wine Barrel top Clamp needed

#8

stepping back to consider the problem

Bill Tindall, E.Tn.

Anyone that prepares panels knows that the path to success, that is a panel that doesn't split later in life, is a well prepared joint. We take great effort to see that there are no gaps in the dry fit pieces and that the pieces are of the proper moisture content. We know if there are gaps at the edges the joint will later fail at the edges, even if we pull the gaps closed with clamp pressure.

You can't make a silk purse out of a sow's ear.

There is no way to make a sound, long lasting panel from these tops without re-machining the joints. Alternatively, use what you got. Stick them together as they are with rub joints and hope the customer looses your address before they eventually fail.