Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Pickling Pine

Posts

Pickling Pine

#1

Kneale Brownson

Pickling Pine

Kneale Brownson

The boss says she wants the pine trim I'm using to trim out her new knitting and sewing room to be pickled so the knots and all show through.

Can I use the same off white latex wall paint I applied to the drywall and just thin it 3-to-1?

Brush on and wipe off like I've done with thinned oil paint for exterior use?

Will I need to clearcoat it?

Re: Pickling Pine

#2

Re: Pickling Pine

John Veerkamp

thinned latex would work, also milk paint. I would coat it with poly, not so much as a seal, but so the surface is smoother. ( a pet peeve of SWMBO)

Re: Pickling Pine

#3

Re: Pickling Pine

Dick Coers

It will work, but all that water will swell the grain and require a few swipes with abrasives. I'd use a water based clear coat. Solvent based will yellow.

Re: Pickling Pine

#4

bleeding sap

Bill Tindall, E.Tn.

If you don't seal the sap with something appropriate the sap around the knots will bleed over time and look ugly. I think Kilz seals knots but confirm.

Re: Pickling Pine

#5

Re: bleeding sap

Hoa in Alameda

Correct. I use thinned Kilz shellac-based primer instead of latex paint.

I then sand and apply several coats wipe-on oil-based poly (my SWMBO likes it warm).

Re: Pickling Pine

#6

Re: bleeding sap

William Duffield

Zinsser B.I.N is vastly superior to KILZ.