Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Shipping a cradle

Posts

Shipping a cradle

#1

JL

Shipping a cradle

JL

My niece is expecting.

I am starting a cradle.

I would like to ship it to her - there isn't any way I would want to deliver it - I have no desire to drive for 3-4 days - one way.

I looked through the archives (need a method for advanced search).

If I box the cradle, it would be roughly 45" L x 32" W x 24" H and weigh on the order of 50 lbs. If I make it so the rockers can be fitted "on site" - I could get the width down to 24".

Re: Shipping a cradle

#2

Re: Shipping a cradle

John K Jordan

JL,

Your package should be well within UPS limits.

https://www.ups.com/content/us/en/resources/sri/sze2.html

I recently had some thick slabs of wood 48" long shipped here UPS from Wisconsin, two packages, about 130 lbs total. I thought the shipping was very reasonable. The seller just wrapped them in cardboard and taped.

For shipping a cradle I would probably make a styrofoam or closed-cell ethafoam support inside the box.

BTW, for an near-infinite supply of free high-quality very thick styrofoam try your local medical or vet clinic. They get very thick styrofoam coolers shipped in often and usually take them in the dump. One clinic here was so happy someone wanted them. (A bonus is enough very good freeze packs to sell on ebay)

I wanted just the small coolers to ship farm fecal samples for parasite analysis but I collect the big ones too and give them to the art department at the local high school. Some are huge. Maybe I could come visit you with a car full.

BTW, here's a sign I chip-carved for my shop from basswood. This is my first try at lettering.


JKJ

Re: Shipping a cradle

#3

Re: Shipping a cradle

David Yoho

There have been discussions on here in the past about methods of shipping that ranged from crating it up yourself and then sending it by bus or a moving van going that way.

Several years ago I had to ship a mahogany butler's table to a customer in Portland, Oregon. I used the service of the local UPS Shipping store. They padded the table edges and boxed it filled with packaging peanuts. I insured it and off it went. It arrived without a hitch and the cost wasn't bad (already figured into my price).

A package going by either FedEx or UPS can see any number of chances for damage during its route but the UPS store did a good job packing it. You could pack it yourself and possibly be better off.

Re: Shipping a cradle

#4

Re: Shipping a cradle

Barry Irby

Good suggestions so far. Another possibility is U-Ship. Go to their site and post your package. The shippers bid on shipping it. Lower and lower. They have individual ratings posted for the shippers. You pick the one you want. Maybe a better rating trumps a lower price. A friend has shipped a dozen things that way with good success.

Re: Shipping a cradle

#5

Re: Shipping a cradle

Ralph Lipeles

Can you send it partially disassembled. Assembled and prefinished sections that will lie flat for easy packing. These sections would then only need glue in a few spots for reassembly.

Re: Shipping a cradle

#6

Re: Shipping a cradle

Bill Tindall, E.Tn.

What do people do with a cradle after the baby is a few months old? They always seemed like a lot of effort for the amount used. It seems to me that putting the effort into a child bed side table or dresser would be more useful.

Re: Shipping a cradle

#7

Re: Shipping a cradle

John K Jordan

>What do people do with a cradle after the baby is a few months old?

A lot of people save a well crafted cradle for their grandchildren, etc. Knowing JL, this could be a valuable antique some day.

Very handy to have one when babysitting. Just the thing for getting screamers to nap.

Also, little girls like to use them for their dolls and stuffed animals.

JKJ

Re: Shipping a cradle

#8

Re: Shipping a cradle

Barry Irby

I made my niece a cradle for her dolls. She scoped it out thoroughly and set it aside. Years later her parents adopted a little brother. Took a long time to get the uncertain adoption to go through, but when it finally happened it was practically instantaneous. the new baby slept in the doll cradle a couple of nights until they could get their hands on a proper bed.

I like the idea of flat packing the cradle, but I would want to be sure the recipients are crafty enough to properly assemble it. Would not want it to fall apart the first night.

Re: Shipping a cradle

#9

Re: Shipping a cradle

AZ in Colorado Springs

i made a cradle for donation to a church nursery a few years ago. They decided it was too nice looking and they didn't want it to get beat up in their nursery. OK; while I was building it my son and DIL were expecting a child (our grandson, as it turned out), so the cradle went to them. They were not thinking of having other kids so the cradle went to another young family at Whiteman AFB who were having a baby. It went to a couple of families before my son was reassigned elsewhere. It may still be circulating there for all I know.

Re: Shipping a cradle

#10

Re: Shoemaker principle/Watts ma after your heart

TomD

I made two of the Simon Watts cradles we have here in the Gallery. or actually a project index of some sort. I didn't make any for my own kids though...

They demount, and contrary to normal principles, it is a feature one actually uses. The demounting in this case has at least three benefits:

It makes the piece easy to store. It makes it easy to ship, whether handing it of or through the mail. And in this case it made it light.

The cradle that appears in Watt's book, was actually the first one I started building. It got so heavy so fast that I switched to his other design. However, it did have the useful feature that one could invert it and use it as a bench. I think these days with all the clutter, cradles gets used for stuffed animal storage, after the original animated stuffed animal has crawled off.