Well, I'm winding down my week of oncall duty. I'm past ready for it to be over.
The buffing work has begun on the guitar body and I'm really anxious to be able to pick it up and play it for the first time soon.....I hope. Still working on the LOML Jr's blanket chest but I'm also spending time getting things done for my wife (to-do list) as well as working on setting up a new iPad for my own mother who will get off the old PC computers at her house and onto an iPad that will serve her much better. I'm keeping my fingers crossed for a successful transition to the iPad for her and put an end to her frustration with computers once and for all.
That's it for me, so what did YOU do this past weekend?
I had a couple guys come over and split about three cords of firewood yesterday -- trees that came down in Hurricane Sandy three years ago that I cut to firewood length and left there. I finally got a neighbor to pick them up with his skid steer and dump them down by my woodshed for splitting. The wood won't be dry enough to burn this season -- well, maybe toward the end of the season -- but it was good to get that pile of log sections out of the way. I lost dozens of trees in that hurricane, including several red oaks over 3' in diameter.
Other than that, I ran into a guy at a farmer's market who was from Tunisia and selling various olive oil and argan oil products. He had a nice display of cutting boards, trivets, mortar-and-pestle sets and nut bowls made from gorgeous olive wood salvaged from groves of trees that were past their prime, some more than 600 years old. Of course, I am now planning to make some Christmas gifts from several big olive slabs that I bought back in the late 70s and never got around to using. I just don't know how I'm ever going to make stuff from all the cool wood I have left in my shed. Not enough hours in the day.
A few years ago I happened on a shop in Athens, Greece that was full of things made exclusively from olive wood - cutting boards, footstools, many spoons and other carvings (some anatomically explicit depictions!), picture frames, and many crudely turned bowls and things, most things made by his son. I was spellbound. I always carry around a few little finger tops and when I showed the guy those and then some pictures on my phone he got all excited and wanted me to meet his son - he had never seen wood turned like that.
He said they could make me a couple of 2" thick simple "cutting boards" that would make it through customs - I just wanted the wood! - but we had to leave before that would happen. Tried again in Italy but it didn't happen. I ended up buying a bit from a US dealer who had it priced like gold. Great stuff though!
Got the garden and flower beds cleaned up. The last of the leaves are picked up and tilled into the garden. Need to go to a friend's farm for a couple loads of horse manure for next years compost. Winterized mowers and tiller. Got the snow blower out and ready to use.
Going to be upper 50s today. Think I will take a motorcycle ride.
I made a mallet. I've been wanting to make one for a long time. Just never got around to it. My current mallet was made on my lathe when I first bought it a long time ago. It's falling apart and I never like it anyway.
This is made from a scrap piece of walnut and scrap ash for the handle.
Turned a few more things from basswood for chip carving and started on my first chip_carved Christmas ornament ever. Not finished, (it's on my unpatented 3/8" drill bit mandrel for carving), and the Redheart finial is not yet attached. FAR different from flat chip carving! This one is practice, will try to do better later. I want to finish some before next week for the Fantasy of Trees benefit auction for the Children's Hospital in Knoxville.
Early Saturday morning the power on our farm went out with a huge explosion. I had to get ready to go shoot a wedding that morning and was a bit rushed between feeding the llamas, dealing with the power company, and tying that darned necktie. Turned out to be a pin hole in the 7200 volt underground cable near the peacock house which blew the fuse on the pole with an explosion that literally woke up the neighborhood. Eight hours later we had power again.
I did make it to the wedding with my camera.
(Needs editing to lighten faces)
Played host to 12 pre-teen girls for a birthday party. I hope I NEVER agree to that again in a weak moment. Hours of screaming, running, selfies, silliness, burning marshmallows, and drama. At least they all got to ride our old kid-proof horse around the round pen, with our trainer leading. Some had never been that close to a horse before!!
Since I had so much time left over this weekend we spent about five hours working with and riding the new buckskin quarter horse. The amazing 15-year-old trainer did more ground work then saddled him up and rode him English style first, then we switched to Western for me and rode horses around the farm and on woods trails - steep hills, over fallen trees, through thick brush, past scary kitty cats - he took it all in stride. We are excited about this guy's potential!
Almost a year ago a neighbor had an olive tree taken down. By the time I saw them they had fed much of it into their chipper but I did manage to get several chunks almost a foot x 3 feet.
This I [crudely] slabbed out on the bandsaw and set it out to dry. Heavy when wet! but now dry. Almost no splitting or twisting. Olive looks to be nice wood to work.
Yesterday I resawed and book matched some pretty grain that will be a lid panel for a jewelry box.
Had a non-busy couple of weeks. At the end of last month, the 27th, I had surgery on my back, the spine C4 to C6 to be specific. My shock absorbers, the things between the vertebra, seemed to come up missing one day, so I needed to have them worked on. Wow I didn`t have that much fun since the last time I had surgery, at least they had the nicest people to help a person and the food was very surprisingly good and only had to stay over night. As nice and as much fun as it was I think I would still stay home. I hope everyone had as much fun as I did. Larry
I installed a Shelix cutter head in my jointer. Took a little longer than I thought it would. I wish that I had a bearing puller. I got everything back together and working. It is a lot quieter, I ran a piece curly maple with no chipping.
Sounds like a great weekend, John, except for the power problem. I have one comment, however. You said:
Played host to 12 pre-teen girls for a birthday party. I hope I NEVER agree to that again in a weak moment. Hours of screaming, running, selfies, silliness, burning marshmallows, and drama. At least they all got to ride our old kid-proof horse around the round pen, with our trainer leading. Some had never been that close to a horse before!!
Take it from me, there will come a time, much sooner than you think, that you will wish you had done much more of that stuff with your kid. It goes by so fast!
... to call the next piece of a customer's order I'm about to start on - A Quadruple Stack.
The king size headboard is done. Next up is a dresser that will be nine feet wide with four banks of four drawers. I'll be using full extension ball bearing drawer slides with a soft close feature.
Then it's on to the most challenging part of the order. Two units to store roughly 100 pairs of a Nike athletic shoe collection.
>Take it from me, there will come a time, much sooner than you think, that you
>will wish you had done much more of that stuff with your kid. It goes by so fast!
You've got that right. My own kids are grown (the oldest is over 40) so all the kids I have around are loaners and grandkids. I try to introduce any kid, as I always did for my own, to as many things as possible - you never know what may spark in interest and develop into a hobby, passion, or career. Horses, llamas, welding, woodturning, beehives, auto mechanics. And some come back over and over. A very wise man once told me that kids spell love T-I-M-E; I can believe it.
The girl who works with my horses comes once or twice a week. She has a lot of experience with animal handling for her age, works at her aunt's horse ranch in Florida for several months each year, 4h, riding club, volunteers at the llama sanctuary, etc. I've watched her corral a 300# hardheaded flighty llama single-handed, break horses of bad habits, and teach our blind horse to ride. She also takes welding lessons! (seems to be interested in everything except stupid boys, which appears to include all of them for now)
We are blessed with this farm and the means to have lots of kids (and adults!) come to learn and do things. The stories I could tell - one particularly troubled 8-year-old son of a single mother went from hateful, disrespectful and sullen to my best friend after just one afternoon of attention, and he is still my friend a year later. :-) Two kids, 5 and maybe 9, spent the day here once - the mother warned me that "they have never played outside." I thought she was kidding. Nope. Never went on a hike, cooked a marshmallow, never saw the stars. Some kids REALLY need to get out!
The herd of per-teen girls were a lot of fun but just too many at once! The next time I'll insist on some practical limits. The birthday girl was the youngest daughter of a girl we knew when SHE was a pre-teen. Time does fly.
I have an older Delta DJ-20, Grizzly Industrial had the one for it on sale in their Christmas flyer, it ended up about $100 cheaper than any where else I could find.
I just put one in my PM 100 planer - well worth it, IMHO. Cleaned up a couple hundred square feet of ipe decking and still cuts regular woods beautifully, though the ipe did take its toll on the cutters (kinda knew it would).
I got the head direct from Byrd since they offered new bearings installed as an option, which really made installation a breeze. Early PM 100's use an obsolete bearing and I figured that Byrd had already figured out which one to replace it with and could more easily press them on that I could.
I wouldn't be able to get it up his stairs at that length. I plan to build two units that I can attach together once in place but have them look like one unit. However, I will be making a single top that will attach to both once joined.
The shoes belong to his adult son, who lives there too. He's doing a remodel of two bedrooms upstairs to create one large room for him. I swear I've never seen that many pairs of any kind of shoe except in a shoe store. His son is what they might call "a sneaker head" but some of them are worth big money today.
I told him I would build the storage units last. It's such an unusual project for me that I need to think about the how's and what's a bit. He has specific requests for these units that I will have to work into whatever plan I make. Such is the way of custom woodworking!!
If you are using the 32mm system, I've got a suggestion that is easy.
I bore the 5mm holes 32mm apart up the front and back just like I would for book shelves or kitchen uppers. But then I put the pins in the back row up one level higher than the front, to give the tilt. A little 1/2" cleat for the heels to snag, and styles that stick in from the cabinet side keeps the shelves from sliding off.
Do you have a good fast method for drilling the holes? If not, I have something for you. I'm sure you have a plunge router, which is the fastest drill you could wish for in a small shop without CNC equipment. With the templates I made back in the mid eighties, I can drill 1.5 holes per second, or 90 per minute, which is about what it takes per side of 4' uppers. And of course the backset from the front edge is right for mounting plates for the hinges when you need doors.