Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Antique drill saw

Posts

Antique drill saw

#1

Antique drill saw

john lucas

I can't pass up really cool antique tools. I found this saw several years ago. A few months ago I found the drill. I finally had time to make the adaptor that goes between two. I just thought this thing was too cool. I have $8 in it. :)


Re: Antique drill saw

#2

Re: Antique drill saw

Stuart Johnson

John, does the drill turn around or is the blade in backwards? It looks like the normal way it would be pushed (one hand on the drill and one on he black knob) would rock the blade out of the cut.

Re: Antique drill saw

#3

Re: Antique drill saw

Larry Clinton At Frankfort, (Central) Indiana

I had one of these back in about 1955, as I recall it was the first power saw I owned, think I received it as a Christmas gift from my older brother. As I recall the saw took a 4" blade.In the next year or so my uncle gave me a old Craftsman jig saw with a 1/4 HP motor. I think the jig saw would actually cut wood faster! Of course all I had to power the saw was a very inexpensive 1/4" drill.

Re: Antique drill saw

#4

blade on backwards

del schisler

blade on backwards

Re: Antique drill saw

#5

I don't think so....

Barry Irby

I rather push it than pull it.

Re: Antique drill saw

#6

My Dad had something similar.

Mike Circo

Except the saw head was a jigsaw.

I used it just once... odd concept, but back in the day, a power tool was expensive, but the metal mechanical portions were cheap.

One thing. His had the same all metal look as yours. The cord/drill wasn't a grounded cord, nor was "double insulated" invented yet and they didn't have the wider spade so it would plug in only one way. Therefore, if you plugged it in the outlet the non-polarized way, you'd get a nice tingle up your arm when holding it. Another reason I didn't use that drill much. :-0

Re: Antique drill saw

#7

Neat!


Re: Antique drill saw

#8

Blade was backwards

john lucas

I installed it after I cleaned it many years ago when I got it. Since I didn't have a drill or the adaptor I didn't think much about how the blade ran. :)

Re: Antique drill saw

#9

Re: Antique drill saw

Dick Coers

I was collecting those for a while. Some are designed like streamliners, others looked like Ray guns. They had belt sanders, jig saws, circular saws, etc. Millers Falls was big in that business.

Re: Antique drill saw

#10

drill/saw/drill press and sander

Dick Coers

Just the start of my collection. From the post WWII days of suburbia and idle time for DIY. I don't have the short post for the table saw setup. No fence, no guard!


Re: Antique drill saw

#11

Re: I don't think so....  JOHN SAID IT WAS ? berry


Re: Antique drill saw

#12

Busted 


Re: Antique drill saw

#13

Jim DeLaney, Austintown, Ohio

Re: drill/saw/drill press and sander

Jim DeLaney, Austintown, Ohio

I still have the drill press apparatus. Haven't used it in about 40 years, though.

Re: Antique drill saw

#14

Jim DeLaney, Austintown, Ohio

Re: Antique drill saw

Jim DeLaney, Austintown, Ohio

I still have the saw, but the original drill gave up it's life many years ago. The saw part is wasting away in a drawer somewhere.