I start oncall duty this morning and I'll strap on the duty belt after I get back from the dentist. The finish on my guitar has cured enough to be rubbed out a bit and I'm hoping to get that part done this week. Still working on my daughter's blanket chest and my hope is that I can get all the major components put together this week as long as my oncall duty remains stable and not crazy busy like it was before.
That's it for me, so what did YOU do this past weekend?
Lathe electrical repair: With help from WCer Harvey Meyer I wired up the new VFD inverter to replace the dead Delta Elect inverter on my Jet 1642 lathe. I still have to build an enclosure and mount, but everything works fine on the bench. A big plus is these devices are no longer a mystery - it's like my piano teacher often said, "everything's easy once you know how." Everything except the piano, I would add.
And for more fun, I brought a new horse to the farm. The other horses have seemed extra quiet and subdued since we lost our American Saddlebred mare - they were SO excited to meet the new guy. Left unhandled in a pasture to play cow for the last 5 years, we expectated he was going to take a LOT of work to get into shape. To the amazement of all, after just a few hours of ground work he loaded like a champ and responded like a old friend in the saddle. I suspect his naturally calm disposition and extended professional Reining training years ago helped. It was like he had been bored to death and so happy to be working!
Bought a used JET JJ-60S six inch open stand jointer that is in very nice condition. It came with a homemade mobile base with nonlocking casters, I'm going to switch that out with a Delta 50-345 mobile base that I already have. Eventually I'll design and fabricate a dust port for it also. The dust chute is there, I just need to add a 4" port to it in a professional looking manner. Today I'm going to assemble an old WILTON 62A woodworking vise that I sandblasted and painted over the weekend, then hopefully get back to working on some new side boards for a used aluminum 5' X 8' utility trailer. It's starting to get cold up here, so I have a few things that I would like to get done before we hibernate for the winter.
John, I am a retired equine veterinarian and have met more smart horses than I have met smart people. When you are nice to a horse he/she is your friend for life. Thank you for being a good horse owner.
I have an older 6" Delta jointer on a stationary enclosed base. The dust chute came out under the out feed bed. Went to a commercial supplier of duct work and bought a 4" "take off". It is basically a square "funnel" that transitions to a four inch round port. It was a nearly perfect fit, exactly covering the chute and If I recall correctly its attached with about two screws. Cost maybe $3. It was the easiest connection I made on my DC system. and it gets 100% of the dust.
I've met some of those same people. Like the lady who tied a new horse to a barbed wire fence and left him there the first night. Or the people who put 12 horses on a two acre field and expected them to feed themselves for months. I work with a llama rescue organization transporting llamas and alpacas for fostering and adoption, some of which have been taken from similar people. Some people shouldn't even be allowed to have a cat...
We are so excited about this horse. He is supple and sensitive and seems eager to do whatever we want. He's also larger, stronger, healthier, and much younger than my others - I may actually get to ride again!
I've been reading up on Reining horses and was pleasantly surprised to learn that they can make great trail horses. (I have access to 150 acres of trails in woodlands and river bottom directly from my barn without ever getting near a road.)
My gelding Tiny went blind 10 years ago - about a month after I bought him! I asked my vet what do you do with a blind horse. She said "You pet it a lot." So we did! But after 10 years of little more than walking and ponying him around the farm, we had a wonderful development: just this summer the girl on the new horse in the photo, worked with the blind guy until he trusted her to ride - now she rides him all over. :-) The problem we have now is he gets so excited he can go places, he wants to go wide open...
The mare I lost recently was the blind horse's constant companion. She was the horse I rode for years until she had a tendon injury in her rear leg (she was 24 years old).
Yonak, I'm trying to imagine that large of a hood attached to the jointer. Barry, with this open stand jointer the motor hangs close to the bottom of the jointer, so the plan is to leave the sloping dust chute, but there is a top cover, and at the bottom of the chute it leaves a 4" X 7" opening. What I don't like about it is that the opening back wall ( chute ) is sloped, so it's almost like putting suction close to that wall, not ideal. So I'm going to remove the cover and point the new DC port in the direction that the ramp is. I'll have to think about how to do that, but I'll get it. Right now it's just finding the time to do it.
Well today I made a plan and picked up some sheet metal. I'll see how tomorrow goes. Does anyone know if JET ever made a dust collection port for this model of jointer ?
I guess that I jumped the gun some, JET did make a DC port to fit the dust ramp with the cover on. But my time into this may not be all lost. I think that I'll get a lot better airflow setting up the port in a different manner then JET did.