For those that haven't thought of using wooden Handscrew clamps to solve a similar problem in the shop, here's an idea worth keeping stashed away until needed.
THE PROBLEM - I was beginning the finishing stage for a king size headboard and wanted to apply the clear coat to both front and back at one time. I didn't want to lay it on one side, do the other, wait until dry, and flip it over. I needed a way to stand it up so it wouldn't tip while working on it, which would allow me to apply finish all the way around it.
THE SOLUTION - Clamping a pair of Handscrew clamps to the bottom of each post provided the stability I needed and I was able to apply finish to both sides in one go.
Once I have completed the back I can lay it on my bench to finish the front side and the spots where the clamps were. The picture below shows what I'm talking about.
I also use the handscrews at the DP, when I have a small or oddly-shaped part I need to put a hole in. Clamp it in the handscrew, and then use one of the DP table's clamps to hold the handscrew..