Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Engineering the Demilune Table

Posts

Engineering the Demilune Table

#1

Engineering the Demilune Table

Bill Tindall, E.Tn.

Engineering the Demilune Table

In trying to follow the construction of a complex chest of drawers by D. Cohen on the Hand Tool Forum I realized that it is easy for the reader to get lost in the course of construction. Over the next few days the engineering and execution of the table skirt will be discussed. I will be breaking these steps down into small bites. I am doing some unconventional steps on this table. I will try to explain the how and why of these departures from conventional.

Pic 1 demilune

To begin, here is a picture of someone else’s demilune(half moon) table. It has a half round top, a matching curved skirt and spindly legs. The obvious challenge is making the curved skirt and attaching the spindly legs. Additionally, my table will have a drawer which adds another element of complexity.

Pic 2 Locating the drawer and legs on mock-up


I can reliably anticipate what something will look like from a drawing if the object is squares and rectangles. But for something curved, I need to see it. In this case I mocked-up the table and from this mock-up located the drawer, legs and space around the drawer and of course overall size of these components.

Pic 2 Pattern


It is essential to first make a pattern of the skirt and locate the legs and drawer on the pattern.

PIC 3,4 Skirt result




Pictures 3 and 4 show the result of gluing up the parts to make the skirt. The legs will eventually attach with bridle joints in front, mortise and tenon in back and the skirt behind the front legs (what is showing white) will be spectacularly veneered. What follows in the next few days is a description of how I got to this point.