Demilune Tale build- Design
Bill Tindall, E.Tn.
First, let me thank those that have offered advice on building this kind of table. I saw my woodworking hero Will Neptune demonstrate clever techniques for building this kind of table but at the time I thought I would never build one and didn't capture the techniques demonstrated. 
What: A Demilune is a table with a half moon (circle) top. They usually have spindly tapered or turned legs. They rarely have a drawer (for good reason).
Why: Daughter needs a table at the entry of their house. The table needs to go between the entry door and an adjacent door with 36" of space between. A small demilune would be ideal here as its curved top would offer less obstruction than a rectangular "Hall" type table.


Design: By placing half demilunes of cardboard in the space it was decided that a top 26" across was ideal. To up the challenge I decided to add a drawer. The drawer will be contrasting veneer with cock beading. The main design challenge is engineering the apron and drawer support and deciding on the drawer size and location details.
I have found that if I draw a scaled drawing of a rectangular piece of furniture that if it looks right on paper it will look right when built. I have similarly found that this approach doesn't work for curved stuff.
At the College of Redwoods I found the students doing mock-ups of their proposed pieces. I thought it might be a good idea to mock up the leg and drawer location and reveal around the drawer. I used a bent piece of Masonite, added some "legs" and drew in the drawer with various reveals until it looked right, about 3/4" top and bottom and 13/16" sides. (don't confuse the drawer in the bench that the mock-up is sitting on for the Demilune drawer which is drawn on the Masonite. )
Caution: A bent piece of anything does not bend into a semicircle or any other simple geometric shape. The resulting shape is a complex mathematical function derived from the engineering field of Statics. However, part of the bent Masonite is close to a half circle and I used this part for the mock-up.
The next step is to engineer the curved apron, which will be veneered. I intend to use the Period technique of "brick-work", to be described in a later post.




