Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Expanding Table Mechanisms

Posts

Expanding Table Mechanisms

#1

Expanding Table Mechanisms

don stephan

A very good friend just said he'd like me to make next year an expanding dining table to seat 18-20 (said the remodeled room will be 27' long). What company(ies) make the best expanding table mechanisms, and do I care if metal or wood?

Re: Expanding Table Mechanisms

#2

Re: Expanding Table Mechanisms

Richard McComas

I'm guessing you're going to need some proprietary hardware.

https://www.youtube.com/watch?v=WFiozWLkkHU

Re: Expanding Table Mechanisms

#3

Re: Expanding Table Mechanisms

Bill Tindall, E.Tn.

I have never engineered a table that long. It is done for banquet tables so somebody knows a successful way. It would seem to need more than one center support. I think the traditional approach is to have a side table that gets employed for center support(s) as needed.

I have a dining table built about 1900 with wood slides that expands nearly as wide as you need. It is wiggly fully expended.

I fabricated slides for a somewhat smaller table. I can't remember the details but I made the expansion slides from wood, capturing a heavy duty Accuride slide in the sliding wood pieces. It wound up more rigid than one made with wood slides.

Re: Expanding Table Mechanisms

#4

Re: Expanding Table Mechanisms

Ken Krawford

Don the table I made is no where near as long as yours. It's 7 ft without leaves and I have 3 leaves 13" long. I used some Watertown metal slides and have been very happy with them. A bit pricey but still going strong. It looks like their largest set of slides are 72" closed and opens 63" @ $400 !

http://www.tableslides.com/

Re: Expanding Table Mechanisms

#5

Re: Expanding Table Mechanisms

Steve jenkins

I second the Watertown metal slides. I have been using their heavy duty slides for years with never a problem. They also sell a bracket for a flip-down center support for really long extensions.