Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

How to Match an Existing Cabinet Door

Posts

How to Match an Existing Cabinet Door

#1

How to Match an Existing Cabinet Door

Ralph Lipeles

The new dual wall oven unit came today and I have a problem. My main concern had been the rough opening. So, I selected the new unit very carefully to fit in the opening that was there. I wasn't thinking about the rest of the unit. Looking at the new unit, the top sticks up about 2" higher then the old unit did. There are dual cabinet doors above the wall oven. So, I will need to put a horizontal 2" high 1 x 2 in place and get replacement doors that are 2" shorter in height then the old doors. The doors are raised panel, oak. I know that there are quite a few companies that make such doors but how do I match the finish? All help is appreciated.

Re: How to Match an Existing Cabinet Door

#2

Re: How to Match an Existing Cabinet Door

George Koch

Is there not room under the unit to cut out and drop it down the two inches?

Re: How to Match an Existing Cabinet Door

#3

Re: How to Match an Existing Cabinet Door

Dick Coers

The bane of any matching job for me is when toner is used to adjust color at the factory. It really adds to the difficulty. You can start by taking an old door and a piece of oak to a GOOD paint store. They can come close with a custom stain. Then I use orange shellac with poly top coat to mimic old clear finish.