Any opinions on Ridgid Jobmax?
John in NM
Looks like an intriguing tool, especially the right angle driver. Anyone got one? Like it? Hate it? 
Knowledge You Can Build On — Est. 1998
Any opinions on Ridgid Jobmax?
John in NM
Looks like an intriguing tool, especially the right angle driver. Anyone got one? Like it? Hate it? 
I have this one *LINK*
Dustmaker Mike
I bought it at the refurbish store in Branson MO a few months ago. I used it for the first time over the weekend to remove the sealer on the inner body panels of a 68 Mustang. First off I will say I have the Boush battery operated multitool and really like it to do this job, but the batteries would run out pretty fast. I used this and it worked like a champ. I could change the speed of it by a large dial near the air inlet. Blade changes need an allen wrench, but is pretty quick anyway. It did use a lot of air which surprised me a little. My compressor kept up with it but it had to work at it. (A 60 gallon single stage Lowes compressor).
I am not sure of the drill head or other attachments but the motor seems soild enough.
Multitool
Whoa!
Mark Mandell - Gone Round In New Jersey
Pulling 18 SCFM under full load, I hope you have very cheap electric rates as that would take a "real" FIVE hp [220v] compressor to run! With the described "Lowe's 60gal" unit, you'd be getting only 11 cfm at best and 60% of the tool's capacity.
Air tools designed for industrial use and facilities with monster compressed air systems but marketed to home owners and small, one-man shops are, IMHO, a huge waste of money on the cost/benefit curve. People forget about how much power it takes to run their compressors compared to using an electric motor corded version. I'd love to have a Dynabide RO sander in my shop, but there's no way I'd pay for a bigger compressor (mine's 12 scfm at max] to run it.