Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

New way of ebonizing wood.

Posts

New way of ebonizing wood.

#1

New way of ebonizing wood.

Keith Newton

Well, new thought for me, and probably better shared over on the turning forum.

After finishing my boat rebuild and putting it into service, I couldn't help but notice that my anchoring stakes, which are a pair of Black Locust 1.5" square x 6' long stakes, which I drop through metal pockets on the transom, then push into the creek bottom, came up black after very little use.

I guess this may be the same process like the ancient wood that they find in peat bogs. I wouldn't have expected anything this instant.

This creek is lined with Cypress trees, and the bottom muck bubbles methane whenever it is disturbed.

Re: New way of ebonizing wood.

#2

That is half the solution

Bill Tindall, E.Tn.

The other half is does the wood stay black after it is dry and left in the sun for XX years.

Re: New way of ebonizing wood.

#3

Re: New way of ebonizing wood.

Hank Knight

Cypress exudes tannin into the water. It turns the water a dark coffee color.

Around here and in the South Carolina Lowcountry where cypress is the dominant tree, the rivers are called "blackwater" rivers for that reason. The tannin probably has a lot tondo with turning your poles black.

Re: New way of ebonizing wood.

#4

Re: New way of ebonizing wood.

John M in Mid Mich

There may be methane, alright, but I bet there is even more ammonia. Lots of ammonia in hi-organic sediments. Think low tide. I bet you are doing the old Arts and Crafts ammonia treatment, au natural. Easy test, right? Put some chunks of your black locust into a sealed container of each and see what happens. Bet I know...

Re: New way of ebonizing wood.

#5

Re: New way of ebonizing wood.

Bob Lang

Probably iron in the water reacting with the tannins. I don't think methane would cause a reaction that would change the color.

Bob Lang

Re: New way of ebonizing wood.

#6

Yep, I think the ammonia is it.

Keith Newton

I've done some googling and found that ammonia fuming of Black Locust turns it black. I found one site where they had fumed a dozen species for a month to see if it would go all the way through, and whether it made any improvements. BL was one of the best, and the color was very stable.

Even though I've done some ammonia fuming before, I have several rustic pieces that I'm scheming on that I like the idea of using this method on, just for the fun of it. I'm not sure if this is due to some kids never wanting to grow up, or if it is more akin to happy as pigs in mud. ha

Re: New way of ebonizing wood.

#7

Re: Yep, I think the ammonia is it.

John M in Mid Mich

Heh. I've been growing some black locust for some years now for firewood... I used to think! But if it responds to ammonia like white oak does, well then, maybe my firewood lot shall be repurposed. I have been intrigued by the possible woodworking uses of both black locust and honey locust, but haven't actually tried either yet. Trees still less than 10" diameter, so must be patient. Possibly my kids' saw logs. Grandkids' logs?

Re: New way of ebonizing wood.

#8

None of the proposed chemistry is correct

Bill Tindall, E.Tn.

Methane is inert. The concentration of ammonia is minuscule and if the mud is acidic its concentration is zero. Similarly the iron concentration will be tiny and iron will be in the wrong oxidation state in this anaerobic environment. But, perhaps a tiny concentration will turn locust black. Might be a good experiment to try. I suspect the color is a result of some biological process, probably fungus poop.

Re: New way of ebonizing wood.

#9

I only mentioned the methane to describe situation

Keith Newton

Not that I thought it was a cause of the color change. I suspected that some readers might visualize the swift creeks in their mountainous regions, and puzzling over what I'm talking about.

I don't guess I really need to know the chemistry to use it. I am planning to take several different species down there to test their reaction, and will put the samples on top of my shop for the accelerated UV part.