Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

24 Aug 2015

Good Morning Everyone,

We have finally gotten a break from the heat and dry, we got rain and the temps have cooled off. I'm really liking the cooler temps. :)

Spent some time doing aquarium maintenance this weekend and took time to watch a movie with the LOML. It was pretty nice not having a lot of work to do and to just have some "down time" for a weekend. The LOML is active in her Master Gardner program and she is really enjoying it. I am happy for her to be doing something she really enjoys and wants to do. The weather is supposed to be drier this week so maybe I'll get the finish started on my guitar body. The neck is finished and I'm really happy with it.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Kneale Brownson

Lattice

Kneale Brownson

I made up this framed bit of lattice that's held in place by a screw so I can gain access to some storage beneath the porch. The two-by material on the ground is a "landing" so I can access the stored matter without being on wet ground.


img

Re: WC Weekend Accomplishments....

#3

Ellis Walentine

Saw an old friend

Ellis Walentine

We had dinner on Saturday night with our old friend Simon Watts, who was visiting my old publisher pal and former boss David Sloan for the night. Simon, as you may recall, was a contributing editor to Fine Woodworking in the old old days, and was our West Coast editor when I was at American Woodworker. He's a lifelong boatbuilder and has written countless articles on boatbuilding and furnituremaking, including several very ambitious complete sets of plans for various wooden sailboats. He's taught boatbuilding in San Francisco and at his island home in Nova Scotia for decades and, at age 85, has just finished up what he claims will be his very last boat. He still has all his wits about him, along with his exhaustive knowledge of all things boats and sailing. A fine time was had by all.

Yesterday I tackled the latest crop of this insidious Russian Olive that has invaded our area so voraciously. I took two pickup truck loads of it to our yard-waste dump and managed to get poked pretty badly on my finger and leg by the inch-long thorns that line the branches of this nuisance shrub. Luckinly I had a tetanus shot recently.

I also finished up our new swing-up kayak rack out under the back porch of the barn. It's designed so that we can back right up to it with our car, swing the rack down, and load the kayaks right on the roof rack of the car. Unloading is similarly simple, and then the whole rack can be pivoted up and back under the ceiling joists with my little block and tackle system.

I started turning some little gee gaws out of boxwood stems that I yanked out of our side yard a while back. It's so hot in the shop that I haven't had the temerity to go back out there and actually finish anything.

Ellis

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

John K Jordan

Graded the gravel drives on the farm after another hard rain, perhaps almost 1/2 mile total. Mowed 3 acres, trimmed what I had to. Treated a mini donkey's hoof, cleaned stalls, moved the three horses from field to field, fed the llamas, and herded peacocks as a normal daily activity (I let just 2 or 3 out each day or the flock will wander off, then herd them back into the big cage every evening)

Delivered cushaws from the garden and honey from the bees. Rode herd on 60 kids 5-7 years old on Sunday morning as usual - good clean fun!

Carved on a footed/handled bowl I turned from bradford pear after the John Lucas demo last week. Dug out the Foredom and recip carver and honed the hand chisels. SO thankful for HVAC in the shop. :-)

Re: WC Weekend Accomplishments....

#5

Re: WC Weekend Accomplishments....

Grant in Iowa

My weekend started last Wednesday, if you don't count Thursday.

Wednesday, went to the Iowa State Fair with some friends. Ate many fried clumps of stuff, watched much of a truck and tractor pull, wandered around looking at antique tractors, Americana, performers of various types and vendors hawking their wares. Walked through the horse, cattle, sheep& Goat barns, saw Iowa's largest boar (1200 lbs or so) eat some Cap'n Crunch, nursed a few beers since I wasn't driving.

Thursday back to work for a bit.

Friday, Mowed so I "wouldn't have to do it this weekend". WoodFest in the Amana Colonies. Helped represent the Corridor Woodcrafters woodworking club to which I am a founding member. Lots of chatting with woodworkers of all stripes. Sold a Jet Mortise machine, bought a Freud Dado blade with dial a width from a friend. Watched many people buy green lumber straight off of the Wood Mizer that was demonstrating sawing. Wondered if they knew how to dry it properly. Ate bbq sandwiches and freshly made caramel popcorn.

Saturday, back to WoodFest until 1PM, then on to a yard party to celebrate friends sons birthday. Was surprised when he proposed to his girlfriend to the surprise of many.

Sunday, lounged a bit in the morning, then back to clean up after WoodFest.

Took the rest of the weekend off...

Regards,

Grant in Iowa

Re: WC Weekend Accomplishments....

#6

Killing unwanted trees

Bill Tindall, E.Tn.

If you paint the cut with brush killer they will not resprout.

Re: WC Weekend Accomplishments....

#7

Ellis Walentine

Sign me up

Ellis Walentine

The power line crews always use that stuff, Bill, but I've never tried it. Do you have a favored brand or compound?

Ellis

Re: WC Weekend Accomplishments....

#8

Dale Lenz

Works best on fresh cuts


Re: WC Weekend Accomplishments....

#9

tree killing chemicals

Bill Tindall, E.Tn.

Well, the Gold Standard of tree killing stuff is Trichlopyr (I think I have it spelled right or at least it is very close) It is off patent now and a gallon of about 50% active ingredient is $70 at my ag store. That quantity would kill a small forest. You can whack a large tree a few times with an ax, pour a 1:1 dilution of this stuff in the wounds and in a few months even a locust is gone. Or diluted even more just paint on the stump and there will be no resprouting.

This stuff is also used for various turf applications and you may find a high priced smaller container at your lawn and garden store. It kills Bermuda grass and about every other lawn invading weed and not regular grass (if diluted properly).

What also works is any chlorinated phenoxyacetic acid formulation (2,4-D kind of stuff) designed for brush. Again, at your ag or lawn and garden store look for something that kills poison ivy, or labeled "Brush Killer". The ubiquitous Tractor Supply has this stuff. Dilute some and paint the stump. It is cheap so maby don't bother diluting. Those suffering Chemophibia will be repelled by the smell. Phenols have a smell that suggests concern. I wear gloves when I remember them.

You will find these chemical names in the fine print ingredient list

Re: WC Weekend Accomplishments....

#10

Re: Saw an old friend

Dale Stansbery

I use Tordon, specifically marketed to kill trees and brush. it's about $16 a quart at your local farm dealer. A little goes a long way. Just dribble a little along the cambium layer on a fresh cut. It has a small popup dispenser nozzle that makes dispensing small amounts easy. It tranlocates to the roots and can affect other woody plants with roots intergrown with the target plant.