Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

I am lost Hagner Scroll Saw

Posts

I am lost Hagner Scroll Saw

#1

I am lost Hagner Scroll Saw

Dustmaker Mike

Well a few years ago I received a Hagner Scroll Saw. I turned it on one time way back when and have not touched it since. Well my Granddaughters were here a few week s ago, so I decided to let them use the saw to cut out the letters of their name. I used 3/4 inch baltic birch ply (Now I know to big). The blade came loose and this is where my problem started. I can not get the blade to stay put no matter what I do. Is there a Youtube video or some other set of instructions out there to show me what the H... I am doing wrong.

Thanks Mike

Re: I am lost Hagner Scroll Saw

#2

Re: I am lost Hagner Scroll Saw

John Veerkamp

Hagners are supposed to be the Rolls Royce of scroll saws. They are still in production. Their web should have the info you need. They do bring a premium price used, even older ones.

Re: I am lost Hagner Scroll Saw

#3

Hagner....errr Hegner.... Scroll Saw

Brian Roberts

https://www.advmachinery.com/manuals/H-manual.pdf

Re: I am lost Hagner Scroll Saw

#4

Re: I am lost Hagner Scroll Saw

del schisler

i have the 18v and use all the time, which end come's loose from the top or the bottom ? shouldn't make a difference , are the top blade holders the same top and bottom ? you use the key to tighen the blade's . i have never had one come loose only break now and than, here is the phone number, they are pro's their and know what they are talking about, Phone 800-727-6553 and here is a pdf copy of the of the manual also look at the holders, they are the one you should be using, good luck go to page 6 for the holders https://www.advmachinery.com/manuals/H-manual.pdf

Re: I am lost Hagner Scroll Saw

#5

Thanks I will take a look

Dustmaker Mike

I will take a look tonight when I get home from work. I know it is me doing something wrong.

We where going to cut out the inside of the letters, so I drilled a hole in each one to start the blade. The first set went fine, it was the second set of letters that the blade would not hold anymore in the top holder.

I will have time to play this weekend to see what is going on. Thanks Again

Re: I am lost Hagner Scroll Saw

#6

This is the answer

terry quiram

The screw in the blade holder has become elongated. And the threads in the clamp are starting to round over. The previous owner has either over tightened or has used them for a long time. Remove and examine the screw and you will see this is the case. Buy a set of new clamp holders with screws to fix the problem.

When I was scrolling full time I wore out a couple sets a year.

Re: I am lost Hagner Scroll Saw

#7

Re: This is the answer

Dustmaker Mike

Thanks I will take a look at them. If I need to replace them is there a lot of chooses and which ones are better and which ones to stay away from.

Thanks

Re: I am lost Hagner Scroll Saw

#8

Re: This is the answer *LINK*

terry quiram

Pretty sure all the clamp blocks are the same for all models. You can order here.


Hegner replacement parts

Re: I am lost Hagner Scroll Saw

#11

Re: More info

Dustmaker Mike

Thanks Again

I think I see my problem besides me.