Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Wierd planer-wish it existed

Posts

Wierd planer-wish it existed

#1

Wierd planer-wish it existed

john lucas

I got up way to early this morning. Went back to bed after a short spell on the forums and had the wierdest dream. I had a new planer. It was specially designed for small fragile work. The outside was plastic and it looked like the stack feeder on a copier platen. It had 2 infeed places. One was flat like you would feed a sheet of copier paper into the feeder. The other was directly above this which looked like the outfeed of the same copier paper feeder. You fed the work through the bottom for thicker stock removal and through the top for really fine stock removal.

Anyway in my dream I was feeding a piece of Ebony that was about 2'x3" and half white and half black with huge voids running at an angle from corner to corner so you only had about an inch of solid wood in the middle. These voids were open about 1/2" on each end and were ragged V shaped. Anyway I fed it through the top fine feeder a half dozen times flipping the wood each pass and it thinned it out and left an almost polished finish on both sides which didn't require any sanding before the finish.

Don't know how this thing worked but I want one. Oh it said in the manual that the blades were set at a more blunt angle to aid planing highly figured wood.

Re: Wierd planer-wish it existed

#2

ebd

Re: Wierd planer-wish it existed

ebd

Wow - you have highly detailed dreams. You actually read the manual? lol

Re: Wierd planer-wish it existed

#3

Ellis Walentine

I've owned two of them

Ellis Walentine

It's called an Inca. I got one of the first ones back in about 1978 and was still using it daily when the shop burned down in '99. I had put carbide-tipped knives in it at some point, and it would plane literally anything, including rosewood down to less than 1/8". I think the key is the high-speed cutterhead and the carbide knives. Tool steel knives were a bit sharper, maybe, but grabbier.

The Inca I have now I only use as a jointer because it's more complicated to flip the dust collection gear around, but it too has a high speed cutterhead (I think it's about 7000rpm x 2 knives.)

The reason a lot of people never picked up on these machines I think has to do with the very short bed. I solved that problem with a shop-made outfeed table with adjustable feet on the far end. I routinely jointed 12' beams dead straight with that thing.

Neither had the dual infeed that you dreamed about, but I never needed to hog off too much material at the time. We had a 24" Buss monster planer for that.

Ellis

Re: Wierd planer-wish it existed

#4

Ditto the Inca

Hank Knight

Ditto the Inca. I had one for 25 years. It planed everything, thick or thin, and I seldom had tearout. I sold it and "upgraded" to a Hammer A3-31. I like the Hammer, but miss my little Inca for delicate work.

Re: Wierd planer-wish it existed

#5

ebd

Re: I've owned two of them

ebd

Quite a while ago I had the chance to purchase one. I had just bought a jointer and didn't get the Inca because I didn't need the jointer function. For some reason I didn't realize that I would just use the Inca as a dedicated planer. I have regretted not grabbing that machine ever since. What a dummy I am. Certainly would never happen again.

Re: Wierd planer-wish it existed

#6

Re: I've owned two of them

TomD

I have owned 3 incas. Thee 8ish and two of the 10ish. I kinda liked the manual feed 8ish, but always be upgrading... I tried to sell an Inca 10ish here a while back it only works for jointing at the moment as a belt (still available) is wanting, but for 350 (canadian) FOB Toronto. I figured more takers than zero would have come forward. Great machines. I don't believe the short beds are a problem except maybe for one's back. Just as accurate for the work I was doing then as now.

Re: Wierd planer-wish it existed

#7

If you are still selling...

Mark Nowicki

... I am looking for one.

Mark

Re: Wierd planer-wish it existed

#8

Re: If you are still selling...

TomD

I am still selling, as mentioned I am in Toronto, and I won't be back there till the end of the month.