Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Clock. Moving ahead.

Posts

Clock. Moving ahead.

#1

Clock. Moving ahead.

Joe in a Cleveland suburb

I debated for a while as to whether or not to show anymore pictures of this clock, but I decided to go ahead. Dents, dings, blemishes and all.

Late last week I decided to move forward with it and just get it done and off the work bench. I cleaned off most of the shellac and scuffed sanded everything.

Then I brushed on some gloss poly. No drama. Just brushed it on and left it alone. It leveled well and looks "ok". Color matches pretty well too. Maybe after a couple weeks of curing, I'll rub it out. Maybe not.

Yesterday, I took some scrap curly maple and made some really small quarter round that will hold the glass in the top door.

I rounded over some little sticks, ripped them in half, planned all down to make sure they are the same width and height, mitered them and they are ready for a little color and finish.

#1


#2


#3


I already turned the knobs, just need to attach them.

I'm going to use small double-ball catches from Lee Valley to hold the doors shut.

The end is in sight. Thank goodness.

Re: Clock. Moving ahead.

#2

looks fine to me...

Chuck in Mtl.

to someone not emotionally involved with your project, like myself, i would say it looks absolutely fine flaws and blemishes included.

Re: Clock. Moving ahead.

#3

Looks Great!


Re: Clock. Moving ahead.

#4

There are people that pay extra...

David Yoho

...for dents, dings, blemishes and all. I think they call it antiquing! :)

Re: Clock. Moving ahead.

#5

Should have said "Spring ahead"

Dick Coers

since you already had the fall back. LOL Yup, looks great!

Re: Clock. Moving ahead.

#6

Re: Clock. Moving ahead.

Yonak

I truly believe a woodworker's (or any craftsman's) worst critic is himself. ..And, usually, the critique is unwarranted and petty.

I, myself, would be proud to feature your clock in my house. It would be a worthy ornament to any house. If you don't like it, I'll take it, and say I made it. :)

Re: Clock. Moving ahead.

#7

Re: Clock. Moving ahead.

Jesse Cloud

Thanks for posting. I made a big mess on a long running project yesterday and thought seriously about tossing it in the landfill. Your recovery cheered me up. :D

Re: Clock. Moving ahead.

#8

Re: Clock. Moving ahead.

don stephan

Glad you resurrected the clock Joe. Generally we are always our worst critics.

Despite the experience, shellac can be a great finish. Just today at lunch I was re-reading a FWW article on a reproduction figured cherry highboy that was stunning. Author said the finish was four coats of shellac applied by pad. Why not try padding, first on some flat scrap and then on a scrap mortise and tenon or similar, just for grins. It takes practice, but not excessive hours.