Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

What happened to Titebond?

Posts

What happened to Titebond?

#1

What happened to Titebond?

Jesse Cloud

I went to Home Disappointment this morning to pick up some Titebond, expecting to see the usual TBI, TBII, and TBIII. Instead, the store offered Original, Premium, and Ultimate. Ultimate, by the way, is a white glue.

Is it just a new name on old products or new glues altogether?

Anyone have experience with the TB Ultimate white glue?

I'm looking to glue up some bent laminations.

Re: What happened to Titebond?

#2

Don't use white for bent lams

Bill Tindall, E.Tn.

It lacks the cross linking chemistry of all the yellows. (the crosslinking is different among the yellows with regular being reversible with heat and moisture and the others not. )

Re: What happened to Titebond?

#3

Re: What happened to Titebond?

BrianMonumentCO

I too went to HD and found titebond.

I bought them this month 8 2015

Titebond II blue bottle labeled PREMIUM Water resistant

Titebond III green labeled ULTIMATE waterproof

Then I looked at my shelf of glues to be disposed of ? My date on them said 7/2012

Titebond II blue bottle premium weatherproof

Titebond III green bottle ultimate waterproof

Titebond II and III appear to be rereleased with different labels contents appear the same.

I did not see the Titebond unnumbered original in the size I wanted. I thought I saw it in a smaller bottle.

I think what I found was the same glue in a different label.

Re: What happened to Titebond?

#4

Want some plastic resin glue?

John in NM

I have half a big tub of it still... probably 10 years old at this point, but it seems to last forever out here. Still good last time I used some, maybe 2 years ago.

Bent lams is what I originally bought it for.

Re: What happened to Titebond?

#5

Re: What happened to Titebond?

Keith Newton

Jess, I don't use any of them for my bent laminations. I prefer epoxy for that purpose. It has a much longer open time, acts like a lubricant between parts, and sets up harder, for less creep. It also has good bridging strength, if by chance two surfaces don't make perfect contact.

If you choose one of those, go with the longest open time, if the project is large. It is heartbreaking to start bending a bundle of laminates over a form, and have the bottom plys buckle out, due to the glue having already grabbed. They don't do so well after torn apart, and moved. Epoxy on the other hand will still be good if you let it squirm even after it jells, as long as it is still making contact between parts.

Re: What happened to Titebond?

#6

Re: Want some plastic resin glue?

Jesse Cloud

Thanks, but I've got a bucket of the stuff myself.

Call me old fashioned, but I prefer 'ole yeller'. ;)

Re: What happened to Titebond?

#7

Jesper, Denmark

Re: What happened to Titebond?

Jesper, Denmark

Weldwood plastic resin glue - urea formaldehyde powder mixed with water. Favorite of boat builders for spar lamination. Note that color is a medium brown.

Alternatively epoxy with suitable thickeners - high density for strength and amorphous silica for viscosity increase. Add a little low density if you want a brown glue line. West System terminology used here.

Conventional wisdom says that you have to have at least 7 layers to avoid spring-back.

Re: What happened to Titebond?

#8

Re: Want some plastic resin glue?

John in NM

Any time :D

I've used both TBIII and plastic resin for bent lams, and in my mind there is no comparing the two - springback was pretty much nil with the resin, I forget how many lams, maybe 12 or so.

I hated mixing the stuff until I started doing it right - by weight rather than volume. Apply with one of those disposable trim paint rollers and it all goes pretty quick and easy.

Re: What happened to Titebond?

#9

Re: Want some plastic resin glue?

TomD

I would agree with that. If we are talking the tan powder stuff. Great glue, about the third use I became spectacularly allergic to it, though I work pretty clean. But it is for sure better than most other things including epoxies which I use in most cases where I need to make stuff laminated, because it can be used in so many processes. But the tan glue is harder if you don't mind the glue line.

Re: What happened to Titebond?

#10

Re: Want some plastic resin glue?

Jesse Cloud

Yeah, we were taught to wear a respirator when mixing it. The liquid state is reasonably safe, but the fine powder can cause grief when inhaled.

Re: What happened to Titebond?

#11

Re: Want some plastic resin glue?

TomD

It was the liquid that got me, which surprised me... I have never really seen that product warnings on that.