Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Mirror frame question *LINK*

Posts

Mirror frame question *LINK*

#1

Mirror frame question *LINK*

mdclor

LOML wants a frame similar to the link. We have a large mirror that I will have a glass store cut to size.

Would you leave the mirror in one large piece and apply the muntins and mullions over the glass like a typical glass door? If so, would you epoxy them to the glass because the final size will be about 36" x 48"?

Another approach would be to make the frame so that the larger mirror would be cut into 9 pieces with each piece sitting in its own "mini-frame". I think this would be stronger and there wouldn't be any need to epoxy the wood to the glass. Also, it would be easier (possible) to replace the glass if there were ever a need.

I will use white oak with the rails & stiles at 4" wide by 7/8" thick and the muntins & mullions 1" by 7/8" thick if done per the second option or 1/4" if I go with the first option. The glass will be held in by 3/8" quarter round and the glass is 3/16" thick.

I appreciate any guidance.


http://www.houzz.com/photos/8748191/Lyn-Design-Bathroom-Mirror-craftsman-bathroom-mirrors

Re: Mirror frame question *LINK*

#2

Re: Mirror frame question

Dick Coers

I'd make the mirror one piece. Use silicone adhesive, or E6000 to glue the grid to the glass. Just some tiny dots will be needed.

Re: Mirror frame question *LINK*

#3

Re: Mirror frame question

John in NM

I would do a one piece mirror as it is generally much less fussy that way.

No need to epoxy the wood to the glass, given the scale you're talking about. If I absolutely required the wood to be attached to the glass I would use dabs of clear silicone instead of epoxy. Let it dry and take any squeeze out off by slicing to the glass with a razor blade and then peeling the excess off the glass.

What I would probably do is make the frame rabbet deep enough to put some kind of backing behind the mirror, 1/4" ply or something. Probably unnecessary, but still makes me feel better :D

Re: Mirror frame question *LINK*

#4

Re: Mirror frame question

Jesse Cloud

I think John nailed it, but I don't yet understand why the decorative wood would need to be attached to the glass.

Re: Mirror frame question *LINK*

#5

Re: Mirror frame question

Paul Cates - Henderson, KY

Along the perimeters, the mirror will reflect the back side of the wood (to a width about the thickness of the mirror?) so something to think about when finishing. I learned that lesson about 35 yrs. ago and am reminded of it every time I am in the upstairs bathroom.

Re: Mirror frame question *LINK*

#6

Re: Mirror frame question

George Koch

It will also reflect the backs of the muntins and mullions in the same way as Paul described above.

Re: Mirror frame question *LINK*

#7

Re: Mirror frame question

Sgian Dubh

An old trick to reduce the visual impact of the inside of the rebate, or the back of framework simply laid over the mirror is to colour those parts black. Dye, paint, and even black marker pens work. Slainte.

Re: Mirror frame question *LINK*

#8

Re: Mirror frame question

AZ in Colorado Springs

I made something very similar to this last year for my daughter, but not so large. IIRC the visible part of the mirror was around 22" x 30".

I made the munitns to overlap with half lap joints, finish all around the edges of the half laps, as others suggested, in case of reflections of the backside of the muntins. The half laps alternated like woven strips.

The ends of the muntins are "half-lapped" into the frame by about 3/4".

So, facing down on the bench at assembly, the muntins went into the frame, then the mirror on top of the muntins and into the frame. I used silicone glue around the edges of the mirror, and had an extra 1/4" for some strips around the egde and tacked into the frame. The silicone glue, of course, also squoze up around the edges of the mirror and grabbed onto the 1/4" strips. It was all walnut.

Re: Mirror frame question *LINK*

#9

Re: Mirror frame question

mdclor

Jess, it probably doesn't need to be, but I like to over build whenever possible. :D

Re: Mirror frame question *LINK*

#10

Re: Mirror frame question

mdclor

Paul & George, thank you for the tips, I would never have thought about that. :)

Re: Mirror frame question *LINK*

#11

Re: Mirror frame question

mdclor

Slainte, black is a great choice since I will probably be using a lighter finish on this. Thank you.

Re: Mirror frame question *LINK*

#12

Re: Mirror frame question

mdclor

AZ, thanks, I have done this previously and it worked well.