Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Can't believe I never thought of this,

Posts

Can't believe I never thought of this,

#1

Can't believe I never thought of this,

Keith Newton

I have a spray can of LPS Magnum lubricant, which had lost all it's pressure while there was still about a cup of liquid in the can. I'm sure there are plenty of you who have tried to use spray paint cans like this, I've had plenty over the years which had lost pressure before the can was empty.

I just pulled the button cap off, and used a air nozzle that would fit over the stem, and aired it up, and replaced the cap. Dang, that was so easy, and worked so well.

OK, before you all dog-pile onto me, I will note that there was no seal made to allow very high pressure. I don't know how much these thin cans are designed for, so if any of you know that, I'd love to hear it. It would be easy enough to lower the pressure of the regulator to the airline before trying this.

Re: Can't believe I never thought of this,

#2

Re: Can't believe I never thought of this,

Tom Dunlap

A couple of weeks ago I read an Instructable about airing up spent aerosol cans.

There were plenty of references back to the can manufacturers webpage showing the specs for cans. Keep the pressure below 100# psi...but read up for more info.

It shouldn't take that much pressure anyway.

Tom

Re: Can't believe I never thought of this,

#3

Re: Can't believe I never thought of this,

TomD

I assumed they used inert gasses, are there any guidelines bout what kind of products not to air up?

Re: Can't believe I never thought of this,

#4

pressure thoughts

Bill Tindall, E.Tn.

A 2-L soda bottle is pressurized to 60 psi. It would seem that the can is both smaller and made more robustly and hence able to handle more pressure than 60 psi.

Re: Can't believe I never thought of this,

#5

Re: Can't believe I never thought of this,

John K Jordan

>I assumed they used inert gasses, are there any guidelines bout

>what kind of products not to air up?

That was my thought as well. Exposure to oxygen should be OK for lubricants but can of course cause things like finishes to cure or thicken.

I keep a tank of nitrogen in my shop with a regulator and hose to replace the air when closing cans and bottles. This has worked well for finishes. I have thought about rigging a fitting to re-pressurize failed aerosol cans.

JKJ

Re: Can't believe I never thought of this,

#6

Re: pressure thoughts

John K Jordan

Do like we did in industrial inspection: increase pressure until it blows!

This requires protection to prevent injury from explosive rupture, even from a tiny aerosol can. Large pressurized cylinders can store an incredible amount of energy so we had a reinforced concrete pit covered with very thick steel plates lowered into place with a crane. Of course, pressure testing cylinders with compressed air is only done in special circumstances. Most pressure tests are hydro tests with pressurized water instead of air.

JKJ

Re: Can't believe I never thought of this,

#7

I know I wouldn't want to use air ahead of time

Keith Newton

And expect it to still be good after storage, but I figured it would work to finish getting the last 20%, but as fast as these paints set, I could be wrong.

However, nothing would be lost in trying to recover something which was already a loss.

Re: Can't believe I never thought of this,

#8

How these spray cans actually work

Bill Tindall, E.Tn.

Anyone that sprays should be puzzled at how an aerosol can can work. If the cans were simply pressurized it would be the equivalent of taking the regulator out of the system and spraying direct from the tank. For example, starting at 100 psi the stuff in the spray gun would rocket out and then eventually dribble as the tank pressure dropped. But this scenario is not what we experience. The cans spray uniformly until they are empty. How's that?

Note when you read the ingredients that the cans are not pressurized by air. Critical to operation, they are pressurized by something that boils well below room temperature, and, is highly soluble in the can contents. When filled, most of the propellant is dissolved in the can contents. Its vapor pressure provides the pressure to force liquid out the atomizing tip. The vapor pressure of the propellant above the liquid in the can will be nearly constant until the can is nearly empty.

If the can suffers a tiny leak, too small to atomize liquid from the can, the propellant will escape through the leak, leaving behind the liquid (paint, oil, WD40, etc). But beware that there still may be significant propellant dissolved in the liquid, anxious to become a vapor when the remaining pressure is released. Drilling a hole in the can to retrieve this liquid can result in a spectacular mess as the contents foam out. (Now how do I know that !?!)

Pressurizing a can with air that has lost propellant will provide a temporary ability to spray from the can, and that may be good enough. It will not restore the can to "full".

Re: Can't believe I never thought of this,

#9

Re: How these spray cans actually work

Larry Clinton At Frankfort, (Central) Indiana

Bill, many if not most of the spray cans are (or at least used to be) supplied with either Butane or Propane. This may have changed due to safety concerns but I have doubts. This is why many of the "potato guns" used spray cans to charge them. As I recall from some 50 years ago when I worked at a propane company, the tanks and trucks were protected with 125 PSI safety valves. I did purchase a few hundred "rechargeable" air spray cans when I worked as an Engineer that had a tire style valve on the top used to allow air charging. Think the limit was around 200 PSI, we used them to spray solvent (Anhydrous denatured alcohol) for cleaning part feeder systems and other machinery. As we had air fittings throughout the plant, the operators could recharge the bottles at will.