Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

OT pontoon boats

Posts

OT pontoon boats

#1

OT pontoon boats

Jerry Gibbs

Just bought a used pontoon. An outboard mechanic pointed out a problem unique to pontoons. Monohulls push debris to the side. Pontoons funnel the debris, such as seaweed, plastic bags, fishing line, etc. into the motor. He said to be especially vigilant about cooling water flowing through the motor and spitting out the back. Jerry

Re: OT pontoon boats

#2

Re: OT pontoon boats

Bob Boswood

Had a few pontoons boats, debris could be a problem depending on the waters you ply your craft. With an outboard, you should always be vigilant. Check for water flow from the water pump every time you start the engine. No squirt, no go. Most motors are easy to clean out the rubber tube supplying the flow from water pump. I keep a piece of brass 1/8th brazing rod in my boat for just that reason.

Re: OT pontoon boats

#3

Re: OT pontoon boats

Joseph Mulherin, sr

Try putting a wire screen ahead of the motor to catch everything before it gets to it. And check out the screen everytime before piloting out on the water.

Re: OT pontoon boats

#4

Re: OT pontoon boats

Dave Bair

There are a variety of anti-weed attachments for outboards that should address your concerns. Note that anything attached in front of the prop is going to reduce your top end and increase your fuel consumption.