Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Darkening scribed lines

Posts

Darkening scribed lines

#1

Darkening scribed lines

Howard

I'm making plexiglass router patterns and scribing location lines on them. Any suggestions as to what I can use to fill in the scratched lines to make them more visible?

Thanks

Howard

Re: Darkening scribed lines

#2

Re: Darkening scribed lines

Stuart Johnson

Trace with a black marking pen and then rub the surface. The ink will stay in the scribed line.

Re: Darkening scribed lines

#4

Re: Darkening scribed lines

John McGaw

The old standby used to be India (drafting) ink which is easy to flow into the line and then wipe off the surface before it dries. I haven't seen any of it in years but it probably still exists somewhere.

Re: Darkening scribed lines

#5

Re: Darkening scribed lines - india ink

Rum

You can buy it on amazon, and the local specialty paper/scrapbooking store had 2 bottles in stock (astoundly in a town of less than 10k people we have a specialty paper store - mostly caters to the scrap bookers but I was able to get a dip pen with a handful of nibs and some india ink there which was nice - I think I was the only person to have ever bought either..).

Re: Darkening scribed lines

#6

Ellis Walentine

Sumi ink

Ellis Walentine

I used to use Japanese similar ink for scrimshaw and for laying out cutting patterns on ivory. Scribe your lines or pattern on the work, dissolves the dry ink in water (or buy the liquid ink), brush it on, let it dry for a minute, then sand lightly with very fine sandpaper. Voila!