Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Abranet

Posts

Abranet

#1

Abranet

Thomas Skaggs, Foothills of Mount Level

Is anyone here using Mirka's Abranet as their daily abrasive instead of traditional ROS discs? Curious about the experience and results.

Thanks,

T

Re: Abranet

#2

Re: Abranet

Rick Christopherson

I've always used automotive grade cloth backed disks on my Dynabrade sanders. Because I retired the shop, I have enough of these to last a lifetime of hobby work.

A couple weeks ago I was given an Abranet disk to play with. I was pretty surprised that this single disk lasted for the entire project. It outlasted my normal cloth-backed disks. It was 120 grit, which is what I normally use on my sander for nearly all sanding work. I rarely need to go up to 180 grit with a Dynabrade, so your results with an electric may vary.

Re: Abranet

#3

Re: Abranet

David Yoho

Tommy, while I have only very limited experience with it, I do know a fulltime professional that's been using it for quite some time and swears by it. He also uses pneumatic sanders over electric.

Re: Abranet

#4

Ellis Walentine

Yes

Ellis Walentine

I use them on my Festool sanders, in grits from 80 to 600. I use an intermediary H&L pad (about 1/8" thick) between the disk and my sander's pad to insulate the pad from heat that could melt the hooks and cause early failure.

Ellis

Re: Abranet

#5

Supplier?

Dick Coers

I had a bookmark set on an industrial supplier with great prices, but the address no longer works. Should have ordered when I had the chance.

Re: Abranet

#7

Found they make an Autonet, much cheaper

Dick Coers

Anyone use the Mirka Autonet instead of Mirka Abranet? Close to half price of Abranet at Homestead. It's $22.19 for 50, 5" discs of Autonet at a couple of suppliers on-line.

Re: Abranet

#8

Careful

Mark Mandell - Gone Round In New Jersey

That looks like an automotive product designed by body shop use that may not do well on wood. I'd call a supplier and ask a few question first or get in touch with Mirka direct.

Re: Abranet

#9

Re: Abranet

Thomas Skaggs, Foothills of Mount Level

Thanks all. Took a good look at the new Mirka ROS and liked what I saw (except the price). If I end up taking the plunge, I'll report back.

T.