Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

SawStop Patent Infringement *LINK*

Posts

SawStop Patent Infringement *LINK*

#1

SawStop Patent Infringement  *LINK*


http://www.woodshopnews.com/component/content/article/466-july-2015-4th/504782-sawstop-files-lawsuits-against-bosch/?utm_source=woodshop-enewsletter&utm_medium=email&utm_content=textlink&utm_campaign=enewsletter-0722

Re: SawStop Patent Infringement *LINK*

#2

Was

Mark Mandell - Gone Round In New Jersey

only a matter of time

a. for a competing system to come out, and

b. for the law suit to get started.

Saw the Bosch in email I get from them a month or two ago.

Knowing something of how Bosch operates (they ain't stupid children), I'm not too far out on a limb thinking that Bosch submitted and got their own patent. If so, Mr. Gass may have a problem with his complaint since I think the Patent office would have to have made a determination of no violation. We shall see.

Re: SawStop Patent Infringement *LINK*

#3

When did sawstops patent expire/get filed?


Re: SawStop Patent Infringement *LINK*

#4

Re: When did sawstops patent expire/get filed?

Mark Mandell - Gone Round In New Jersey

Clueless, but pats are good for 20 years so I doubt it's that old.

Patent cases are very expensive = "Battle of the Experts Witnesses"

I hope Mr. Gass has got his poop wired, because if he's wrong, he can sink mucho moola in this and get zip for a result.

Re: SawStop Patent Infringement *LINK*

#5

Re: When did sawstops patent expire/get filed?

BrianMonumentCO

Dr Steve Gass invented it in 1999....

But when was the patent filed?

Re: SawStop Patent Infringement *LINK*

#7

For Gass

Mark Mandell - Gone Round In New Jersey

2005

http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-bool.html&r=24&f=G&l=50&co1=AND&d=PTXT&s1=SawStop&OS=SawStop&RS=SawStop

and

http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-bool.html&r=11&f=G&l=50&co1=AND&d=PTXT&s1=SawStop&OS=SawStop&RS=SawStop

Re: SawStop Patent Infringement *LINK*

#8

Re: When did sawstops patent expire/get filed?

BrianMonumentCO

I read where a utility patent is 20 years.

But a design patent is 14 years of protection.

I wonder how they are using the term utility and design.

Re: SawStop Patent Infringement *LINK*

#9

Utility vs design patents.

BrianMonumentCO

1502.01 Distinction Between Design and Utility Patents [R-11.2013]

In general terms, a “utility patent” protects the way an article is used and works (35 U.S.C. 101), while a “design patent” protects the way an article looks (35 U.S.C. 171). The ornamental appearance for an article includes its shape/configuration or surface ornamentation applied to the article, or both. Both design and utility patents may be obtained on an article if invention resides both in its utility and ornamental appearance.

Re: SawStop Patent Infringement *LINK*

#10

Re: Utility vs design patents.

Mark Mandell - Gone Round In New Jersey

you now know more about it than I do :D

Re: SawStop Patent Infringement *LINK*

#11

America's got Talent table saw injury

john lucas

One of the contestants had 2 fingers bandaged. The judges asked himabout it and he said it was a table saw injury. Maybe he needs one of those 2 saws.

Re: SawStop Patent Infringement *LINK*

#12

Re: SawStop Patent Infringement

Bob Lang

Not a big surprise, this is the culmination of events in a saga that has gone on for several years. When I was at PopWood I wrote a bunch of stuff about this issue on the blog.

http://www.popularwoodworking.com/woodworking-blogs/editors-blog?s=%22table+saw+safety%22

There is a lot of complexity here, no good guys among the players and a good example about what has gone wrong with the way business is conducted these days in the USA.

The patent office doesn't do much investigating before issuing patents. It's easier to approve what comes in and let the courts decide later on.

The Bosch saw uses the mechanism developed by the Power Tool Institute. This was specifically designed to not violate the Saw Stop patents. If it does or not will be hashed out in court.

The major power tool manufacturers put useless guards on saws for a long time, working to a voluntary U.L. standard. That covered their liability, leaving them the defense of "we put the industry standard guard on our saw, and you took it off. Not our fault if you got hurt."

Gass came up with a great idea, but couldn't sell it to the manufacturers at the price he thought he should get. He eventually started his own company and sells a lot of saws, probably more than everyone else put together in the cabinet saw category. The real money in table saws is in the "job site" saw category.

Gass and his partners are patent attorneys. A Google patent search on Stephen Gass kicks up about 80 separate patents on methods to stop table saws, band saws, miter saws and routers. That's a lot of paperwork to argue about in court.

Almost everything published by the media in all of this is spun one way or another. Most published stories can be traced back to Gass or his lobbyist or to the Power Tool Institute. Journalists are a lot like the guys with jobs at the Patent Office; it's a lot easier to publish a press release than actually do some research.

Part of the spin is that this is a "David and Goliath" story. Saw Stop is a much smaller company than Bosch, but "David" has been planning this battle for a long time, is pretty well prepared and knows the ins and outs of patent law. Bosch makes a lot of products and files lots of patents every year. They know what they're doing and certainly saw this coming.

The sad part about all of this is that it isn't about keeping people safe, it's about money and the things people will do to ensure they get the biggest pile. The final outcome will come down to who has the best lawyers and the deepest pockets.

Bob Lang

Re: SawStop Patent Infringement *LINK*

#13

Re: SawStop Patent Infringement

BrianMonumentCO

Bob,

In one spot you stated that sawstop sold more cabinet TS than all others combined.

Is that a fact or an opinion.... And do you have stats to back it up.

Also Steve Gass has many patents that appear to have zip to do with table saw safety.

How many have you found that are actually TS safety related?

Re: SawStop Patent Infringement *LINK*

#14

About your last paragraph Bob

Dick Coers

What do you mean by "this". The lack of a safe and useable blade guard by all the manufacturers for all those years, was also about money and not safety. No splitters like our European cohorts to limit kickback, same story. There is lots of blame to go around for considering profit before safety. So curious what you mean by "all this"?